Multi-Function Jump Starter for 12V/24V Car (ZXBP002), Jump Starter, Car Jump Starter

1.Output Voltage at auto start end 12V
2.Size: 165*79*40MM
3.USB port:5V,2.1A
4.Charge mode:CC/CV 15V 1A
5.Start current:200A
6.Peak current:400A(3S)
7.Cycle life:3000 times (Approx 2-3 years)
8.Operating temperature range:-40-85 °C
9.Operating temperature range:0-85 °C                                                              
10.Capacity:13600mAh

Functions:
1.Emergency jump start for 12V auto mobile.
2.Safe to use in extreme temperature condition.
3.High luminance and Multi-modes Led lighting.
4.Support to charge of various brands mobile, MP3/MP4, laptops(no any connector for the MACbook) and tablet.
5.Multiple safety protection design, to ensure the product have no defect.

Characteristics:
1.High safety: using rare earth materials, In any case, no fire breaking out and no explosion, accompanying you through the journey with no worries.
2.Mini exquisite and protable, the battery is 1/5 volume of equivalent specification lead-acid batteries, is daily life necessity of self-driving travel and outdoor sports.
3. Easy to start ,continuously trigger the auto mobile for over 30 times When the power is full. Even the power is less than 20% ,it can still start up the engine for emergency.
4. Powerful LED luminance system: general lighting,SOS distress signal and bright flashing lighting.
5.Mobile power back up supply:Support to charging various digital product.
6.Ultra-large battery capacity: charging various digital products up to 2-5 times.
7.Ultra-long cycle life for over 3000 times.
8.High temperature resistance safe to store in car and temperature up to 80-85°C degree during day parking.
9.Low-temperature safety performance of a battery.
Products Picture:


Accessories:


Package:

Special Note:
To start 12V car please make sure the product power capacity is 20% or above. Clamp the red jumper cable (i.e. the positive cable) to the dead car's positive battery terminal, which is marked with a "+." Clamp the black jumper cable (i.e. the negative cable) to the booster car's negative battery terminal, which is marked with a " - ". Make sure that the clamp is firmly connected to the battery and then start the engine. Disconnect the jumper cable one by one after the engine started.