Model NO.
DY-S3500
Type
Double Cylinder Hydraulic Lift
Lifting Capacity
3.5T
Driving Type
Hydraulic
Certification
CE, ISO, RoHS, GS
Driving Motor Number of Mechanical Lift
1
Double Cylinder Lift Type
Hydraulic Scissor Lift
Shearing Lift Type
Ultrathin Type
Condition
New
Brand
Qiyun
Design
Scissor
Length
4500mm
Width
625mm
Lifting Height
1850mm
Second Lifting Height
450mm
Second Load Capacity
2000kg
Min. Height
350mm
Power
3kw
Voltage
220V/380V
Trademark
QIYUN
Transport Package
Wooden Case
Specification
1980kg
Origin
China
HS Code
8425429000
Qiyun Double Scissor Car Lift Platform Vertical Car Lifting Machine Car Use Maintenance Lifting Equipment Hydraulic Car Lifter
Scissor lifts are automotive repair machinery used in the automotive repair industry. The hydraulic system drives the lifting, also called the hydraulic lift, which plays a vital role in the maintenance and repair of automobiles. With the increase in car sales, the demand for lifts as an important tool for car maintenance has also greatly increased.
Scissor lifts are divided into large shears (double scissor type), small shears (single shears) lifts, ultra-thin series lifts, small shears lifts are mainly used for car repair and maintenance, with high safety and convenient operation. After trenching, it is level with the ground. The big scissor lift has a lot of gushing out, it is the best equipment to cooperate with the four-wheel alignment device, and can be used for car maintenance, tire, chassis maintenance. It can be trenched or installed directly on the ground.
The ultra-thin series of scissor lifts do not need to dig slots and are suitable for any repair shop. Some floors are not suitable for installing two-post lifts and ordinary four-post lifts. The machine has a wide contact surface with the floor, so it can be installed in On any floor slab that can be driven, solve customer site problems. This type of machine is the mainstream product in the future, and it is used on a large scale abroad.
Scissor lifts are divided into large shears (double scissor type), small shears (single shears) lifts, ultra-thin series lifts, small shears lifts are mainly used for car repair and maintenance, with high safety and convenient operation. After trenching, it is level with the ground. The big scissor lift has a lot of gushing out, it is the best equipment to cooperate with the four-wheel alignment device, and can be used for car maintenance, tire, chassis maintenance. It can be trenched or installed directly on the ground.
The ultra-thin series of scissor lifts do not need to dig slots and are suitable for any repair shop. Some floors are not suitable for installing two-post lifts and ordinary four-post lifts. The machine has a wide contact surface with the floor, so it can be installed in On any floor slab that can be driven, solve customer site problems. This type of machine is the mainstream product in the future, and it is used on a large scale abroad.
The small scissor lift is specially designed for the fast repair plant and the auto repair beauty department. The underground design does not take up space:
1. Scissor concealed ultra-thin flat plate structure is convenient for tire disassembly and chassis maintenance.
2. The starting height is 105mm, no need to dig a trench to install.
3. Equipped with hydraulic interlock insurance and anti-tube explosion device, the operation is stable and reliable, and the synchronization is good.
4. Luxurious scissor wide flat plate structure, excellent synchronization performance.
5. The level can be accurately adjusted to fully meet the requirements of four-wheel positioning.
6. Hydraulic, electrical and pneumatic components, the equipment runs smoothly and reliably.
7. Pneumatic double-tooth self-locking insurance and anti-tube explosion structure, automatically open when descending, to ensure safety.
8. Ingenious and unique sliding system, compact platform, no need to dig pits.
9. Equipped with guide rails for secondary trolleys, and optional secondary lift trolleys.
1. Scissor concealed ultra-thin flat plate structure is convenient for tire disassembly and chassis maintenance.
2. The starting height is 105mm, no need to dig a trench to install.
3. Equipped with hydraulic interlock insurance and anti-tube explosion device, the operation is stable and reliable, and the synchronization is good.
4. Luxurious scissor wide flat plate structure, excellent synchronization performance.
5. The level can be accurately adjusted to fully meet the requirements of four-wheel positioning.
6. Hydraulic, electrical and pneumatic components, the equipment runs smoothly and reliably.
7. Pneumatic double-tooth self-locking insurance and anti-tube explosion structure, automatically open when descending, to ensure safety.
8. Ingenious and unique sliding system, compact platform, no need to dig pits.
9. Equipped with guide rails for secondary trolleys, and optional secondary lift trolleys.
Operating procedures:
1. The lift shall not lift vehicles exceeding the rated load.
2. Raise the lifted vehicle to the center of the lifting platform steadily at low speed and pull up the hand brake.
3. When lifting the vehicle, remove the surrounding obstacles, pay attention to the lift platform and the surrounding people can not stand, and check whether the two sides of the lift rise simultaneously.
4. When lifting the vehicle, if it is found that the two sides of the platform are out of sync, stop it and use it after troubleshooting.
5. During the lifting process, you must always pay attention to the lifting conditions of the lift and the vehicle. During the lifting process, the block is steadily locked on the safety plate, and maintenance can be carried out after the lift is stopped.
6. When the lift is lowered, you must first press the upward marking button. After the block of the lift beam is separated from the safety plate, press the turning handle and then press the downward marking button, and the lift will descend by itself. Do not loosen the block In the case of, feel free to press the turn handle or mark down button.
7. When the equipment is not working for a long time or overnight, it should be lowered to the lowest position on the ground.
8. Before leaving get off work every day, the surrounding environment of the lift must be cleaned, keep the lift clean and clean, and regularly check, maintain and add hydraulic oil and grease.
1. The lift shall not lift vehicles exceeding the rated load.
2. Raise the lifted vehicle to the center of the lifting platform steadily at low speed and pull up the hand brake.
3. When lifting the vehicle, remove the surrounding obstacles, pay attention to the lift platform and the surrounding people can not stand, and check whether the two sides of the lift rise simultaneously.
4. When lifting the vehicle, if it is found that the two sides of the platform are out of sync, stop it and use it after troubleshooting.
5. During the lifting process, you must always pay attention to the lifting conditions of the lift and the vehicle. During the lifting process, the block is steadily locked on the safety plate, and maintenance can be carried out after the lift is stopped.
6. When the lift is lowered, you must first press the upward marking button. After the block of the lift beam is separated from the safety plate, press the turning handle and then press the downward marking button, and the lift will descend by itself. Do not loosen the block In the case of, feel free to press the turn handle or mark down button.
7. When the equipment is not working for a long time or overnight, it should be lowered to the lowest position on the ground.
8. Before leaving get off work every day, the surrounding environment of the lift must be cleaned, keep the lift clean and clean, and regularly check, maintain and add hydraulic oil and grease.
Company Information:
