Model NO.
SG-B005
Standard
Standard
Certification
CE
Condition
New
Function
Auto Tool Maintenance
Material
Steel
Guarantee
12 Months
Weight
11.5kg
Box Size
45X30X21cm
Stes/CTN
1set
Quality
High Quality
Payment
30% in Advance
Transport Package
Plastic Box
Trademark
SG
Origin
China
After-sales Service:
1 Year
Warranty:
1 Year
Type:
Repair Car
Operation:
Step.
1 Determine if the vehicle has a trapped rotor or a floating rotor. Step.
2 Assemble the tool components, and press out the worn bearing. Step.
3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms. Step.
4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.) Step.
5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing. Step.
6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
Send Message
