Model NO.
IT-15-5A
Coating
Powder Coating
Airflow Direction
Fully Undershot-type
Heating Mode
Diesel
Paint Mist Treatment
Dry-type
Condition
New
Brightness
>1000lux
Total Fan Capacity
2 X 11kw
Air Volume
2 X 35,000m3/H
Empty Loaded Air Speed
+/- 0.26m/S
Voltage
380V/400V/415V, Your Special Voltages Are Accepted
Noise
<78dB
Heat Exchanger Power
2 X 232kw
Burner Model
Riello Rg5d X 2
Transport Package
Polyfoam and Metal Frame
Specification
15000 x 5000 x 5000MM(L X W X H)
Trademark
INFITECH
Origin
China
HS Code
8419899090
Production Capacity
300 Sets Per Year
After-sales Service:
24 Hours After Service
Warranty:
2 Years
Type:
Coating Production Line
Certification:
CCC, CE
Substrate:
Steel
Brand:
Infitech
Infitech Bus/Truck Paint Spray Booth Paint Cabin Paint Oven Painting Equipment
Product: IT-15-5A(full downdraft)
Basic information
| DESIGN STANDARD | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| BOOTH DIMENSIONS | |
| Internal dimensions | 15000 X 5000 X 5000mm (L X WX H) |
| External dimensions | 15170 X 7120 X 5800mm (L X WX H) |
| BASEMENT | |
| Basement design type | Full downdraft, one row of grids in the middle (need to dig 800mm deep pit for return air) |
| Carrying capacity of the grids | 900kg/wheel |
| Filter area | 10.5m2 |
| Grid description | Size: 997X 756mm, 40X3mm, galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of such steel grating. |
| CABIN | |
| Cabin structure | 80 x80 3.0 thick square tube frame, gantry structure Wall panel horizontal insert |
| Plenum height | 800mm |
| WALL PANEL | |
| Wall panel | 60mm dual-skin insulated panels filled with heat resistant rock wool |
| Top material | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Edge material | 1.2mm galvanized plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 4 wing entry door (3+1 structure) |
| Size | 4270 X 4800mm (W X H) |
| Quantity | Product entry door, 1 set |
| Door descriptions | Containing frame , with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800 X 2000 mm (W X H) |
| Quantity | 2 sets ***4 sets as optional |
| Door description | With safety glass observation windows |
| SIDEWALL LIGHTING | (LED lamp) |
| Quantity and power | 18 sets of light fixtures, each 4 X 18W, total 1296W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| CEILING LIGHTING | (LED lamp) |
| Quantity and power | 20 sets of light fixtures, each 4 X18W, total 1440W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| Brightness | > 1000Lux |
| FILTRATION SYSTEM | |
| Pre-filtration | G3 grade pre-filter bag filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filtration | Fiberglass paint arrestor filter |
| Extract filtration | Activated carbon filter mat, M style |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Intake fan power and motor description | 2X11KW, 970rpm, 380V, 50Hz, CE |
| Parameter of intake fan | 2 X 35,000m3/h, 650pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Exhaust fan power and motor description | 2X11KW, 970rpm, 380V, 50Hz, CE |
| Parameter of exhaust fan | 2 X 35,000m3/h, 650pa |
| Equipment empty loaded air speed | +/- 0.26m/s |
| NOISE | <78db |
| HEATING SYSTEM | |
| Heating exchanger material | Stainless steel 1Gr18Ni9Ti(SUS304) |
| Heating exchanger capacity | 2 X 232KW(340,000Kcal/H) |
| △T temperature increase ability | 25° C (from -5°C to 20°C, in painting phase) |
| Maximum working temperature | 80° C |
| Burner Model | RIELLO RG5D X 2 |
| Heating Time | 10-18 minutes (from 20° C to 60° C) in baking phase |
| DUCTWORK | |
| Straight ducting | 20 pieces |
| Rain hat | 2 pieces |
| 90°elbow | 2 pieces |
| 45°elbow | 2 pieces |
| Reducers | 4 pieces |
| Manual damper | 2 pieces |
| Electric damper | 2 pieces |
| CONTROL SYSTEM | |
| Implementation standards | Standard Y/Δ drop starting control system |
| PLC programmable logic controller | PLC control, higher reliability, lower failure rate |
| Pressure detection | The pressure gauge indicates pressure inside the booth. |
| Power distribution facilities | CE standard electric cable, terminal box, wiring tubes and accessories |
| Features | Painting, heating painting, flash-off, baking, emergency stop switch, failure indication, baking delay stop protection, motor overload and over-current protection, over-temperature alarm indication, fan and heating system interlock control |
| OPTIONAL | |
| It allows painter to reach all around the workpiece, greatly increase efficiency and save labor cost. |
| Inverter control, energy-saving, more economical |
| Touch screen control, easier to operate |
| |
| |
| |
| Special item | Rated power: 50KW |
Detailed information
- Cabin structure - Gantry structure: rigid, stable, durable & asthetics.
- Entrance door: 4-wing entry doors with tempered observation window; equipped with anti-sagging means
- Lighting system
1) IP55 protection grade, light fixtures fully meet EU standards;
2) 45 degree angled ceiling lights + horizontal sidewall lights create virtually shadow-free environment
- Intake & Exhaust system
1) Non-spark fan design conforms to EN13355-2004 requirements for the fans.
2) Motor and fan are completely separated, which is compulsory requirement for fans in EN13355-2004.
3) Adopting cylinder-drive paint-bake conversion damper, more quickly and accurately.
4) Direct-drive fans, virtually maintenance-free
- 3 Axis Lifter With Platform (Optional)
Increase your efficiency and save on labor costs by adding this critical tool to your paint booth. 3-axis lifter with platform allows painter to reach all around buses/trucks and large work-pieces by using joysticks instead of positioning ladders and moving tools up and down. Cut prep time in half, cut masking time in half, cut painting time in half with 3-axis lift in your paint booth.
- Three-axis movement, fully reaches all around the work-piece.
- Stable performance, safe and reliable.
- The speed of moving left and right, up and down, in and out can be adjusted by frequency inverter.
- The electric control system of the operating table conforms to anti-explosion requirements.
- Foot switch controls the longitudinal movements, and inching button controls the up and down movements.
- The 3D lift consists of vertical support post, working platform, sliding rail(upper rail, lower rail), lifting system, stretch system and electric control system.
- The lifting capacity is not less than 300kg, moves stably.
| 3 axis lifter with platform | |
| Lifting Height | 3300mm from floor |
| Travel distance | 14000mm |
| Travel speed | 8m/min |
| Dimension of the platform | 900 X 900mm |
| Lifting height of the platform | 550~3300mm |
| Speed of moving in and out | 3m/min |
| Lifting capacity of the platform | 300KG |
| Total power | 3KW |
Service & Support
Dedicated, expert, always available, and fast response, INFITECH has made customer service a priority since the very beginning. INFITECH's service does not end after the equipment is sold and shipped. Instead, INFITECH attends to every request/query from the user during the installation, commissioning, operation and maintenance processes.Pre-sales & Sales Service
1. Carefully study clients' demands, design & offer products that best suit clients' needs.
2. Offer favorable price, but not at the cost of reducing product performance.
3. Use quality materials of well-known brands to ensure reliability.
4. Inspect product quality before packing and shipping.
5. Seaworthy packing for the goods.
After-sales Service
Delivery commitment: Comply with the delivery schedule required by clients. If fail to commit, shall inform clients at least 1 week in advance.
After-sales Service Commitment
1. Supply installation manual, electric schematic, and operation & maintenance manual to help users install, operate and maintain equipment properly.
2. 2-year warranty for main components. Consumables are not within the scope of warranty. INFITECH freely replaces damaged parts caused by quality issues within warranty. Beyond warranty, INFITECH provides spare parts at cost. If the equipment is damaged due to human factors, INFITECH repairs or provides spare parts at cost. Technical support will be provided within 24 hours after receiving the report of the problems.
Engineering case
Factory image:
Paint booth packing and loading:
Send Message
