Model NO.
LTL
Condition
New
Transport Package
Export Plywood Case
Specification
ISO
Trademark
Haolida
Origin
Qingdao, Shandong
HS Code
8425429000
Production Capacity
2
Type:
Floor Jack
Structure:
Hydraulic Jack
Capacity (Load):
41-50T
Power Source:
Electric
Max Height:
>400mm
Certification:
ISO 9001:2008
General Introduction
Large-tonnage Chassis Assembling Jacking System is mainly used for assembling and maintenance work of special engineering vehicle chassis. It is composed of six jacks, it can be used with 4 units together, it is controlled by a control cabinet, and can be wireless remote controlled.Technical parameter
- Lifting force: front jacks- 400KN/group; middle, back jacks-400KN/group
- The minimum working height: front jacks-400mm; middle, back jacks-900mm
- The maximum working height: front jacks-1250mm; middle back jacks- 1550mm
- Rising speed: front, middle, back 0-350mm/min(adjustable)
- Descending speed: front, middle, back 0-750mm/min(adjustable)
- The distance between baseboard and ground when the middle and back jacks are no-load: 6-8mm
- Rated working pressure of hydraulic units: front jacks-16Mpa; middle and back jacks: 16Mpa
- Power source/frequency: 380V 50HZ
- Oil pump motor power: 2.2KW
- Working voltage of solenoid directional valve: 220V
- Limit switch voltage: 24V DC
- Signal generator voltage: 24V DC
- Effective working distance of remote control: 50M
- Remote control battery: 5#x2x1.5V
- Overall sizes( Length x Width x Height)
Front jacks: 1200×800×1260mm (not including the front beam)
Back jacks: 1200×630×900mm
Control cabinet: 800×650×1400mm
Send Message
