Model NO.
P504A
Frequency Range
Low Frequency
Electric Current
DC
Wire Feeder Type
MIG Welding Machine Wire Feeder
Wire Feeder
Wire Feeder for MIG
Motor Type
D76r
Motor Voltage
DC24V
Motor Output Power
95W
No-Load Speed
220rpm
No-Load Current
1.8A
Stall Torque
24n.M
Stall Current
10A
Wire Feeder Fram Type
504A
Wire Feeder Roll Size
40*32mm
Apply for Wire Roll Weight
15kg
Feed Wire Diameter
0.6mm 0.8mm 0.9mm 1.0mm 1.2mm
Max Feed Speed
26m/Min
Mini Steady Operation Voltage in Load
DC4.5V
Transport Package
Carton
Specification
76mm
Trademark
WEWIN
Origin
China
HS Code
8501310000
Production Capacity
60000/Month
Cooling Way:
Water Cooling
Shielding Gas:
Argon Gas
Control:
Automatic
Type: Two Driving Wheels, Four Driving Wheels
Model:D76R-2495-220-P504ABV1.0/1.2
D76RP60-2495-220-P504ABV1.0/1.2
This wire feeder can be used for the welding machine which the welding current is less than 500A,the welding machine can work at spot and continue weld.
Handle direction: Right and Left
Stuff: Aluminium, Plastic
Voltage:DC24V
Power:95W
No load speed:220RPM
No load current:1.8A
Stalling torque:24N.M
Stalling Current:20A
Type of roll: V, U, K three types
Dia of roll: 32mm*40mm*10mm only
Feed speed:26m/min
Wire Feeding Rack Model :P504A
Can send wire reel specifications:15kg
Diameter of Welding Wire: 0.6mm, 0.8mm, 0.9mm,1.0mm,1.2mm,1.6mm
Wire Feeder Speciality
1.This wire feeder use our own design motor which is special for welding machine with a gear ratio is 20/1,it works at low noise and high torque
2.The standard motor for this kinds wire feeder is 95W 220RPM,also you can use the 65W 220RPM motor,voltage can be 42v or 48v.
3.The roll only use the 40*32mm rolls.
4.Motor can be fixed encoder ,hall sensor and opto switch.
Model:D76R-2495-220-P504ABV1.0/1.2
D76RP60-2495-220-P504ABV1.0/1.2
This wire feeder can be used for the welding machine which the welding current is less than 500A,the welding machine can work at spot and continue weld.
Handle direction: Right and Left
Stuff: Aluminium, Plastic
Voltage:DC24V
Power:95W
No load speed:220RPM
No load current:1.8A
Stalling torque:24N.M
Stalling Current:20A
Type of roll: V, U, K three types
Dia of roll: 32mm*40mm*10mm only
Feed speed:26m/min
Wire Feeding Rack Model :P504A
Can send wire reel specifications:15kg
Diameter of Welding Wire: 0.6mm, 0.8mm, 0.9mm,1.0mm,1.2mm,1.6mm
Wire Feeder Speciality
1.This wire feeder use our own design motor which is special for welding machine with a gear ratio is 20/1,it works at low noise and high torque
2.The standard motor for this kinds wire feeder is 95W 220RPM,also you can use the 65W 220RPM motor,voltage can be 42v or 48v.
3.The roll only use the 40*32mm rolls.
4.Motor can be fixed encoder ,hall sensor and opto switch.
Send Message
