Automatic Rail Welding Carriage KA-C1 is a horizontal rail travel type welding equipment with rack and pinion drive, which is widely used for flat butt welding and fillet welding. Other types of welding, such as horizontal and vertical downward welding, can also be performed by adjusting the gun fixture and angle. The trolley travel body and control panel are integrated into one unit, which can weld while walking on the track. The track is magnetized to the workpiece, so it is easy to install and remove. Small size and light weight make it very easy to move and use.
Features:
(1)Automatic welding device for flat welding and cross welding.
(2)Adopt rail travel method, can weld on the box surface.
(3)Small size, light weight, easy to move and install, and can be welded by non-skilled workers.
(4)Small size, light weight, easy to install and move, non-skilled workers can also perform welding.
(5)The trolley running track adopts magnet adsorption type and will not be separated from the welding line, the track is easy to use. Its basic length is 1.5m, which can be lengthened according to users' needs.
Advantages:
(1)Reduce labor intensity and improve operating environment.
(2)Improved work efficiency, 1.5 times that of manual welding.
(3)Zero welding defect rate and nearly 200% improvement in overall efficiency over manual welding.
(4)High automation, high welding stability.
| Weight | 8kg | ||
| Dimension | 490mmx340mmx210mm | ||
| Power source | AC 220V | ||
| driving method | rack and pinion | ||
| walking speed | 0~1040mm/min | ||
| Torch parameters | up and down | 55mm | |
| left and right | 120mm | ||
| front and back | 55mm | ||
| operation angle adjustment range | 360o | ||
| Operation function | power light | ||
| power switch | AC 220V | ||
| walking start | |||
| walking stop | |||
| walking speed | |||
| direction selection | to the left or to the right | ||
| Rail | installation method | magnetic custion | |
| material | AL6N01 | ||
| weight | 6kg(including magnet) | ||
| dimensions | 42 x 29.3 x 1500(W x H x L) | ||
