Model NO.
V36
Power
Electric
Warranty
2 Years
Suitable Materials
PP PVC PVDF PE
Operation Way
Hydraulic
Voltage
380V
Volume
12.1m³
Max Pressure
14MPa
Transport Package
Plywood Box
Specification
3 plywood boxes
Trademark
RIYANG
Origin
China
HS Code
8515219900
Production Capacity
500 Units / Month
Application:
Infrastructure, Construction
Cooling Way:
Air Cooling
Control:
Hydraulic
Frequency Range:
Low Frequency
Electric Current:
AC
Style:
Vertical
RIYANG BUTT FUSION WELDING MACHINE V36
Riyang V series is on-site hydraulic butt fusion welding machine in Inch size, to fit American market.
It is used to butt weld pipe and fittings such elbow, tees, wye and flange necks without any additional equipment by simply adjusting the clamps and drag bar.
It is suitable for welding plastic pipe and fittings made of HDPE, PP, PVDF and other thermoplastics material.
| Technical Parameters | V36 |
| Welding Range O.D. | 24" - 36" |
| Power Supply | 380V±10%, 50/60Hz |
| Rated Power | 16.9 kw |
| Working Pressure Range | 0-160 bar |
| Piston Area | 38.8 cm2 |
| Temperature Range | Max. 320ºC |
| Packing dimension | 2550*1850*1800 mm |
| 1600*1150*1900 mm | |
| 800*350*400 mm | |
| Gross Weight | 2502 kgs |
Basic Frame
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Featured by
- Oil seal kit, origins from Germany, make sure that the pressure performance stays in more stable way.
- 4sets quick coupling helps operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplug or plug in.
- Using integral shaft(top chromate treatment) instead of assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Heating Plate
Featured by
- We use Dupont from USA for coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- High-quality drill
- The proper distribution of chains and gears ensures smooth operation of the facer.
Electrical box Assy.
featured by
- Temperature-controlled switch
When temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quite safe to connect or disconnect the plugs before or after welding.
- Very well-connected wires and more reasonable layout. Each wire is marked with the corresponding numbers, thus giving more convenience to do trouble shooting when a failure happens.
Support
featured by
- Ergonomic design
Featured by
- We use Dupont from USA for coating of the heating plate, which is the best in industry. It's much sticker to aluminum plate, more non-sticky to plastic pipes surface. Temperature deviation of different points on heating plate is 2-3 degrees (small size machine) and 5-6 degree (big size machine).
Trimmer
featured by
- High-quality drill
- The proper distribution of chains and gears ensures smooth operation of the facer.
Electrical box Assy.
featured by
- Temperature-controlled switch
When temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quite safe to connect or disconnect the plugs before or after welding.
- Very well-connected wires and more reasonable layout. Each wire is marked with the corresponding numbers, thus giving more convenience to do trouble shooting when a failure happens.
Support
featured by
- Ergonomic design
Hydraulic Power Station
Featured by- The control panel centralized in the hydraulic unit enables operators to set welding parameter and execute welding procedure conveniently. A refined large readable pressure gauge strength the friendly use.
- Accumulator: Properly adjusting and installing the accumulator could gives much help to cushion the pressure when it is rising and falling. Undoubtedly it can help to keep the pressure stable for welding procedure (soaking, cooling). With the accumulator, the welding procedure will accord with the welding standard of DVS2207-1-2016, ISO21307-2017 etc.
Featured by- The control panel centralized in the hydraulic unit enables operators to set welding parameter and execute welding procedure conveniently. A refined large readable pressure gauge strength the friendly use.
- Accumulator: Properly adjusting and installing the accumulator could gives much help to cushion the pressure when it is rising and falling. Undoubtedly it can help to keep the pressure stable for welding procedure (soaking, cooling). With the accumulator, the welding procedure will accord with the welding standard of DVS2207-1-2016, ISO21307-2017 etc.
There also some Options foDatar you to choose it:
- PEWELDBANK Data Logger(Bluetooth Device+FMS),Its from our Australia Partner,Install after sale is possible
- Roller Support for Pipe Size OD 315-630mm
- Imperial and metric Insert Reducer
- Aluminum Stub end holder
- Lifting Crane
- PEWELDBANK Data Logger(Bluetooth Device+FMS),Its from our Australia Partner,Install after sale is possible
- Roller Support for Pipe Size OD 315-630mm
- Imperial and metric Insert Reducer
- Aluminum Stub end holder
- Lifting Crane
Q&A:
1. PAYMENT TERMS
We accept 30% TT deposit and 70% balance payment against photo before delivery or 100% TT in advance.
2. LEAD TIME
Usually, we have plenty of stock for V355 and below, and keep max. 3units for V450 and V630. As to V800 and above, we'll arrange production according to the actual orders.
3. WARRANTY
2 YEARS. During the warranty period, RIYANG authorized dealer and RIYANG will totally cover the responsibility to fix the machine; Claim parts usually could be couriered to clients within 3days since receiveing the claim. Express fee will be borned by RIYANG.
4. CAN YOU DO CUSTOMIZED DESIGN
YES. RIYANG has its own design and technical team that can undertake OEM and ODM, but there are quantity requirements, please contact our sales consultant for more information, thank you.
5. CAN YOU PROVIDE TRAINING CLASS ?
1. Customers are welcome to come to our factory for 1-2 weeks of training, in addition to air tickets and hotels, RIYANG can afford meals and local transportation costs.
2. We can also arrange for technical personnel to fly to the customer's local to do on-site training, for a period of 1-2 weeks, customers bear air tickets, hotels, catering, as well as technical training fees, please contact our sales consultant for details.
3. RIYANG offers online training in English and Spanish, which requires an appointment in advance.
6. HOW COULD BE YOUR DISTRIBUTOR AT LOCAL?
RIYANG welcomes customers from all over the world to negotiate agency business, but for agents, we have specific requirements, details please contact our sales consultant, thank you!
You may be interested in:
V630 CNC Butt fusion welding machine TPS630 Pipe Saw
Send Message
