Model NO.
BY-3025RR(QD)
Power
Pneumatic
OEM/ODM
Available
Warranty
One Year Limited with Lifetime Warranty
Service
New Project Machine Design& Drawing
Transport Package
Wooden Case
Specification
(L)460MM*(W)400MM*(H)900MM.
Trademark
BOYI
Origin
China
HS Code
8515809090
Production Capacity
1000 Sets/Year
Application:
Household Appliances, Garden Supplies, Decoration, Commodity, Auto Part, Electronic, Stationery, Toy, Plastic Welding Machine
Cooling Way:
Air Cooling
Control:
Semi-Automatic
Frequency Range:
Low Frequency
Electric Current:
AC
Style:
Vertical
| Desktop pneumatic hot melt machine model:BY-3025RR(QD) | |
| Product Description | This equipment has been applied to the hot-melt riveting of chassis products, and the equipment can be welded simultaneously from two different directions. The total number of riveting points is 4, and the temperature is controlled by area. |
| 10 sets of welding procedures can be pre-stored, and the data interface can be linked to the production line. | |
| MISUMI original heating device. Hot riveting head temperature control, with temperature self-check, closed loop control, multi-point independent temperature control, temperature control accuracy can reach ±2 degrees. | |
| Equipped with man-machine interface, Chinese and English interface operation is more intuitive. | |
| The cooling system adopts blowing air cooling. | |
| The production cycle is 25S-40S. | |
| Man-Machine Engineering | Safety: The equipment is equipped with a protective grating and a safety baffle for scalding safety warnings. |
| Authority management: The device sets the administrator and operator authority. | |
| The height of the working table is 750MM. (Sitting operation) | |
| The device is started by two hands. | |
| Equipment capability | Indiscriminate operation verification (the device is protected if it does not follow standard procedures). |
| Quality traceability | Capacity record requirements. |
| Alarm fault code and its record. | |
| Man-machine interface: The visual information of the man-machine interface includes current operation steps, alarm information and solutions. | |
| IMS interactive function: support Ethernet communication, the equipment has a QR code scanning recognition function, hot riveting temperature, displacement, hot riveting time data can be recorded and the data needs to be pushed to the company's IMS system. (This function is customized according to customer requirements.) | |
| Electrical layout/Safety | The equipment is equipped with tooling identification sensors. When the tooling model is installed incorrectly, the system will alarm and lock the equipment. |
| Locking function: The product is locked in the corresponding station due to misoperation or failure of the equipment (requires designated personnel to unlock). | |
| Equipment alarm: In the event of equipment failure or misoperation, the man-machine interface displays alarm information and prompts the cause of the failure; the three-color light shows the failure. | |
| Control system voltage DC24. | |
| I/O- Each station I/O has a 10% margin for future expansion. | |
| Technical Parameters | Equipment dimensions(L)460MM*(W)400MM*(H)900MM. |
| Maximum mold capacity of equipment:(L)300MM*(W250MM*(H)250MM. | |
| Power : 3-phase 380V 50Hz, can be customized. | |
| Air source specifications: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA). | |
| Adaptable to ambient temperature : -5ºC~40ºC | |
| Adaptable to ambient humidity : 20%~80% | |
| The noise of the transmission part does not exceed 70 decibels. | |
Send Message
