Model NO.
YL-ATPM-006
Working Style
High-speed universal
Disc Diameter
Size Can Be Customized as Your Request.
Variable Speed
Without Variable Speed
Weight
1250kg
Voltage
380V, 50Hz
Power
7.5kw /5.5kw
Spindle Length
600mm
Spindle Speed
1800-2200 R/Min
Grind Area
600mm*400mm(L*W)
Grind Time
0-3 Minutes
Transport Package
Wooden Case
Specification
1500mm*1500mm*1300mm (L*W*H)
Trademark
Yi-Liang
Origin
China (Mainland) Guangdong
HS Code
8460902000
Production Capacity
30PCS/ Momth
Type:
Surface Grinder
Power Source:
Electricity
Object:
Polishing Shaft
Application:
Metallic
Disc(Wheel) Type:
Brushing Wheels
Material:
Metal
YL-ATPM-006 single shaft flat surface grinding polishing machinery
Door hinge polishing /buffing machine is suitable for the plain surface polishing of stainless steel door hinge, copper door hinge.
This machine is equipped with mechanical transmission, easy for both operation and maintenance, and selected quality electrical control panel ensures the stability of the complete machine.
It takes the leads in China to install the emergency stop system on the machines, which ensures the safety operation during production.
This machine is equipped with mechanical transmission, easy for both operation and maintenance, and selected quality electrical control panel ensures the stability of the complete machine.
It takes the leads in China to install the emergency stop system on the machines, which ensures the safety operation during production.
Basic Parameter Of Machine
| Main Shaft (Hexagon) | Rotate Speed: 1800-2200rpm, Length: 600mm, Adjutsing Range: 600mm |
| Grinding Time | 0-3 minute |
| Size | 1500mm*1500mm*1300mm (L*W*H) |
| Weight | 1250kg |
| Working Platform | 580mm*400mm, up and down adjusting range: 20-30mm |
| In/Out Travel Distance Of Work Table | 400mm |
| Sway Range Of Work Table | 0-70mm |
Parameter Of Main Motor
| Power Rate | Rotate Speed(RPM) | |
| Main Motor | 4 Poles, 5.5/7.5KW | 1400 |
| Sway Controling Motor | 4 Poles, 250W | 1400 |
| In/Out Controling Motor | 6 Poles, 370W | 980 |
| Open/Close Controling Motor | 4 Poles, 400W | 400 |
Main Motor Power:5.5KW /7.5KW. (5.5kw is suitable for small size plane work piece polishing; 7.5KW is suitable for the big size flat work piece polishing. If you have any confused to choice the right power, please kindly contact us.)
Voltage: 380V, 3 phase. (Noted: The voltage is measured by industry voltage. We accept custom-made to fix industrial voltage for diffrent countries needed)
Frequency: 50 Hz.
Voltage: 380V, 3 phase. (Noted: The voltage is measured by industry voltage. We accept custom-made to fix industrial voltage for diffrent countries needed)
Frequency: 50 Hz.
Grinding Area:
1. Area size (length * width ): 600*800mm. It suitable for grinding / polishing the flat work pieces. ( We accept custom-made .)
2. Up and Down Adjustment Range: about 20-30mm.
1. Area size (length * width ): 600*800mm. It suitable for grinding / polishing the flat work pieces. ( We accept custom-made .)
2. Up and Down Adjustment Range: about 20-30mm.
Application:
It is application to metal/copper/brass/zinc/allyoc/stainless steel door hinge matt/satin/mirror/fine effect polishing. It can finish different polishing steps with different abrasive wheel.
Advantage:
1. Easy adjusting height of polishing shaft by regularing adjusting rod. Clockwise adjust for higher shaft, reduce polishing pressure; anticlockwise adjust for lower shaft, fortify polishing pressure. Note: Adjust slowly in case of not enough pressure or too much pressure.
2. Easy adjustment. (Only with 6 control button to finish all the operate step! And it can adjust the grinding time according your products. )
3. With high efficient production .
It will spend from 30 seconds to 3 minutes to finish one polishing step at one time . More flexible for spoon flat (before shaped) polishing.
It is application to metal/copper/brass/zinc/allyoc/stainless steel door hinge matt/satin/mirror/fine effect polishing. It can finish different polishing steps with different abrasive wheel.
Advantage:
1. Easy adjusting height of polishing shaft by regularing adjusting rod. Clockwise adjust for higher shaft, reduce polishing pressure; anticlockwise adjust for lower shaft, fortify polishing pressure. Note: Adjust slowly in case of not enough pressure or too much pressure.
2. Easy adjustment. (Only with 6 control button to finish all the operate step! And it can adjust the grinding time according your products. )
3. With high efficient production .
It will spend from 30 seconds to 3 minutes to finish one polishing step at one time . More flexible for spoon flat (before shaped) polishing.
Send Message
