Model NO.
MD-IDC6080
HS Code
8015809090
Production Capacity
200PCS/Yearpcs/Year
Inner diameter slicer and optical edger
Details
Inner circle fully automatic slicing machine is using inside circle to cut a variety of semiconductors, crystal, ceramic, NdFeB magnetic material.
Installed in the spindle, the edge-type Diamond blade cutter is high-speed rotating, the table was feeding by computer control of horizontal and vertical movement, the material on the fixture of the table was cut into the required product.
We have the semi-automatic/fully automatic inner circle clicking machine, within a circle slicer two kinds of specifications, a variety of models. For the Automatic Slicer inner circle. a worker can operate about 16 units slicer at the same time
MD-IDC6080
Product description: Inner diameter circle slicer MD-IDC6080
Details
Inner circle fully automatic slicing machine is using inside circle to cut a variety of semiconductors, crystal, ceramic, NdFeB magnetic material.
Installed in the spindle, the edge-type Diamond blade cutter is high-speed rotating, the table was feeding by computer control of horizontal and vertical movement, the material on the fixture of the table was cut into the required product.
We have the semi-automatic/fully automatic inner circle clicking machine, within a circle slicer two kinds of specifications, a variety of models. For the Automatic Slicer inner circle. a worker can operate about 16 units slicer at the same time
MD-IDC6080
| Main technical parameters | |
| Max machining size(mm): | φ60 ×80mm |
| Cutting speed (²/): | 3-6(²/) |
| Degree of balance sheets by cutting deviation(mm): | ±0.005 |
| Cutting film thickness(mm): | ≥0.30 |
| The thin-cut tolerance (mm): | ±0.015 |
| Horizontal stroke(mm): | 120 |
| Longitudinal travel(mm): | 100 |
| Longitudinal degrees: | 0-100Grid, each grid To 0.01,Each turn a lap in order to1 |
| Spindle Electrical: | 3 Phase 380V0.75kw |
| Spindle Speed (r/min): | 3500Rev /min |
| Adjust the amount of work table: | |
| Horizontal angle: | ±45º |
| Pitch angle of elevation: | ±10º |
| Vertically(mm): | 24 |
| Cooling tank capacity(kg) : | 50kg |
| Cooling tank motor: | 3 Phase 380V 0.12kw 2780r/min |
| Power: | Three-phase four-wire 50Hz 380V |
| Dimensions(mm): | 1000mm*1100mm*1600mm |
| Weight(kg): | ~1000(kg) |
Send Message
You May Like
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
Home |
About Us |
Contact Us |
Terms of Use |
Privacy Policy |
Billing Terms |
Shipping Policy |
Return & Refund Policy |
Sitemap |
Feedback |
© 2003-2023 CAUTOP Inc. All Rights Reserved
Email: [email protected]
Ningnan Ningnan Automobile Parts Center Ruanjian Blvd, Yuhuatai District, Nanjing, Jiangsu, China
Email: [email protected]
Ningnan Ningnan Automobile Parts Center Ruanjian Blvd, Yuhuatai District, Nanjing, Jiangsu, China
