Model NO.
KWS
Type
Pin Grinder
Power Source
Electricity
Object
Rotating Pin
Application
Paint, Printing Ink, Pesticide, Color Paste
Disc(Wheel) Type
Grinding Pin
Material
Tungsten Carbide, Silicon Carbide, Zirconia
Working Style
Centrifugal
Disc Diameter
N/a
Variable Speed
With Variable Speed
Warranty
1 Year After Shipment Date
Overseas Service
Available on Cost of Buyers
OEM
Available
Customised Service
Available
After Service
All for Free on Line
Trademark
TRANSOCEAN
Transport Package
Seaworth Wooden Case
Specification
2350*1130*1880
Origin
China
HS Code
8479820090
Characteristics:
- Interlaced array of high rigidity alloy grinding pegs on internal surface of grinding chamber and external surface of rotator shall provide high impact and shear to grinding media and reduce dead area largelyMaterial of grinding chamber/ rotor: S.S.440C/ S.S.420Discharge of products: with dynamic/static separating ring or static separating screenSealing mode of main shaft: double face mechanical sealSealant circulating in mechanical seal is compatible with solvent in grinding media to avoid pollution to grinding media.Cooling jacket outside sealant tank and cooling jacket outside grinding chamber are adopted to cool down mechanical seal and grinding media.Cooling system inside hollow rotor is available on HBM with separating ring.Adjustable range of pressure limit switch at material inlet: 0-6 barAdjustable range of temperature limit switch at product outlet: 0-100ºCFault alarm on control panel shall be activated in such cases:
*Working pressure in grinding chamber: too high
*Temperature at product outlet: too high
*Circulation of coolant for mechanical seal: not work
*Level of coolant for mechanical seal: too low
*Motor load: overloadApplication: Wet grinding of paint, ink, printing ink, dye, pesticide, color paste, etc.Technical data:
| Model | KWS-5 | KWS-15 | KWS-25 |
| Main Motor Power(KW) | 7.5 | 11 | 22 |
| Main Shaft Speed(r.p.m.) | 1800 | 1100 | 900 |
| Capacity of grinding chamber (L) | 5 | 15 | 25 |
| Output Capacity(L/H) | 20-100 | 30-300 | 60-600 |
| Cooling Water Consumption(m3/h) | 0.8 | 1.2 | 1.5 |
| Compressed Air Pressure(MPa) | 0.6-0.8 | ||
| Grinding media | Φ0.4-1.2mm 94.50%+ ZrO2 Beads | ||
| Material feeding | By diaphragm pump/gear pump | ||
