| Performance Parameter | |||
| No. | Item | Unit | Value |
| 1 | Handling Volume | m³/h | 60000(66432) |
| 2 | Dust content of flue gas | mg/Nm³ | ~5000-10000 |
| 3 | Dust content at outlet of dustcollector | mg/ Nm3 | < 50 |
| 4 | Size of filter bag (diameter x length) | mm | Φ160X6000 |
| 5 | QTY. of filter bags | pc | 336(24×14) |
| 6 | Total filtration area | M2 | 1013 |
| 7 | Material of filter bag | Polyester needled felt with water-proof and oil-proof surface treatment , | |
| 8 | Fil'tering | M/min | 0.987(Max1.093) |
| 9 | Allowable working temperature of filter bag | ºC | 120(Max130) |
| 10 | Dust cleaning method | Compressed air pulse jet | |
| 11 | Pressure of compressed air | 0.3-0.4 | |
| 12 | Control method of dust cleaning | Timing control | |
| 13 | Resistance of dust collector | <1500 | |
| 14 | Compression strength of dust collector | -5000 | |
| 15 | Maximum air leakage ratio | <3 | |
| 16 | Consumption of compressed air in dust cleaning | 1 | |
| 17 | Material of bag cage | Q235 | |
| 18 | Specifications of bag cage (diameterX length) | Φ160X5980 | |
| 19 | Pulse valve | 3"(2x12=24 pcs) | |
Global statement
This project is for 12Ton Induction Furnace Dust Removal System. The project is contracted and executed by Shanghai Primetech.
Technical Features:
The original flue gas is around 1100~1400ºC while after cold air dilution the flue gas at the inlet of the dust collector is less than 120ºC. The original flue gas is around 1100~1400ºC while after cold air dilution the flue gas at the inlet of the dust collector is less than 120ºC.
The inlet of the dust collector is provided with a temperature control device and a cold air dilution valve.
For a 12-ton induction furnace, the discharge amount is around 40,000-50,000 Nm3/h, flue gas temperature is ≤120ºC and normally around 60-80ºC (assume flow under working conditions is 48,000-60,000m3/h)
Induced draft fan adopts variable frequency motor for transmission, to save energy consumption.
During melting, the fan operates at a low frequency (around 35 Hz) with an air volume of 40,000 m3/h; during tapping, the fan operates at a high frequency (around 45 Hz) with an air volume of 60,000 m3/h.
Once the dust removal system is completed, the flue gas generated by furnaces can be properly handled, recovering around 200-ton dust per year. Dust concentration at the working position will be lower than 10 mg/Nm3, reaching relevant labor hygiene standards; flue gas capture efficiency will be over 95% and flue gas emission concentration will be no more than 50 mg/Nm3, meeting national and local environmental conservation standards and gain excellent social and environmental benefits.
Dust Collector
Ash Hopper
Middle Baghouse
Spark Catcher
Erection
Our Team
Professional technical team
Prime is staffed with professional technical team of various disciplines, including process (layout and general drawing), equipment, hydraulic, electrical automation, water supply and drainage, ventilation and firefighting. All our engineers are from well-known designing institutes or colleges; Prime is staffed with professional import & export team skilled with the practice of import and export business, including sea freight packing, logistics organization, L/C review, cargo booking, and customs clearance, L/C negotiation, double authentication of shipment documents, etc. All above personnel are well experienced in the execution of projects in Southeast Asia and Middle East.
Complete procurement mechanism
Our professional team of procurement offers strict management of supplier 's qualification inspection and selection, complete system of supplier listing, rating and elimination, to ensure the supplier is qualified and capable of implementing the project and supplied with product of high quality, and maintain a healthy and good condition of credibility, contract settlement and capital flow management.
Quality management system
Our complete quality management system , the process control covering from Scheme formulation , engineering technology, detailed design, to processing and manufacturing of equipment and material , ex-factory test and site erection and commissioning till it put into production, which through multi-level inspection, tour inspection, supervision and node control can ensure quality of the final product.
Well experienced
Executive team is abundant in experience of overseas project implementation with similar project working experiences, esp. experience in Southeast Asia, Middle East projects;
Professional
Professional technical and management team with abundant experience in the implementation of domestic and international projects;
Responsive
Responsively and meticulously, translating your needs into complete solutions;
Integration
Integrating various technologies and resources in China and fulfilling complementary advantages, by relying on professional teams;
Motivation
Motivated to provide the optimal solution and quality products;
Exceptional
Exceptional, delivery and,implementation of projects to meet, your expectations;
