Model NO.
MNFC20A
Origin
China
Certification:
CE
Operation Type:
Automatic
Type:
Filter Cartridge Dust Collector
Transport Package:
Cartons Foam Protection
Specification:
570*290*500mm
Trademark:
RHK
High vacuum fume purifier adopts the international leading polyester micro-filtration technology, the filtration efficiency of
welding, cutting and grinding fume (0.1um) can reach 99.9, and at the same time, it can guarantee the high air flow. The
purifier has many advantages such as low noise, stable performance, easy to operate and use.
High negative pressure welding fume purifier is widely used in various welding, polishing, cutting, grinding and other
processes to produce fume and ash purification and the recovery of rare metals, precious materials, etc. Applicable to ash
removal is more dispersed fume volume is also larger workstation.
High negative pressure welding fume purifier does not need to pull the use of up to 20 meters'
of suction hose, can be sucked from the source to remove fumes, greatly improving the collection
rate of fumes and ash. The clean air is evenly guided and dispersed from the direction of the grille-like
exhaust port, and special sound insulation cotton is built into the housing to minimize noise.
This product is designed as a manual ash cleaning system, and the filter cartridge is taken out regularly
for back-blowing cleaning, so that the filter cartridge can achieve better filtration effect and extend the use
life. This purifier is the first choice of smoke and ash purification equipment for inashrial processing, welding
smoke removal, cutting ash removal and grinding ash removal. 
High negative pressure welding fume purifier can be used with cutting machines, welding torches, automatic
sandblasting heads, welding machines and other binding packages to remove ash at the source and improve the
efficiency of welding fume ash removal.
Use it with our fume extraction torch, protect welder's respiratory system and avoid environment pollution,
it's a more healthy and more environment-friendly option!
processes to produce fume and ash purification and the recovery of rare metals, precious materials, etc. Applicable to ash
removal is more dispersed fume volume is also larger workstation.
High negative pressure welding fume purifier does not need to pull the use of up to 20 meters'
of suction hose, can be sucked from the source to remove fumes, greatly improving the collection
rate of fumes and ash. The clean air is evenly guided and dispersed from the direction of the grille-like
exhaust port, and special sound insulation cotton is built into the housing to minimize noise.
This product is designed as a manual ash cleaning system, and the filter cartridge is taken out regularly
for back-blowing cleaning, so that the filter cartridge can achieve better filtration effect and extend the use
life. This purifier is the first choice of smoke and ash purification equipment for inashrial processing, welding
smoke removal, cutting ash removal and grinding ash removal.
The control box panel contains:
-Power switch (device on/off button)
-Digital display (current and voltage display while the device is in use)
-Air volume adjustment
-Power switch (device on/off button)
-Digital display (current and voltage display while the device is in use)
-Air volume adjustment
High negative pressure welding fume purifier can be used with cutting machines, welding torches, automatic
sandblasting heads, welding machines and other binding packages to remove ash at the source and improve the
efficiency of welding fume ash removal.
Use it with our fume extraction torch, protect welder's respiratory system and avoid environment pollution,
it's a more healthy and more environment-friendly option!
Performance Parameter | MNFC-20A | |
Air Absorb Volume m³/h | 200±10 | Fan and ash collector integrated |
Motor Power | 1.2Kw | |
Negative-pressure of Wind Blower | 26000Pa | High voltage fan |
Filter Material | PET | Imported filter material |
Filter Cyliner | 1 | φ200*170mm |
Total Filter Area | 6(m2) | |
Voltage | 220V/50Hz | |
Controller | Stepless speed control | |
Air Compression | 0.5-0.6Mpa | Oil-less and waterless |
Ash Bucket Volume | 5L | |
Noise | ≤70±5 dB(A) | |
Ash Cleaning Method | Manual | |
Dimension (L*W*H) | 570*290*500mm | |
Equipment Weight | 25±5kg | |
Send Message
