910m3/H Flow Self-Cleaning Type Inlet Air Filter Housing for Compressors, Self-Cleaning Type Inlet Air Filter, Self-Cleaning Air Filters

910m3/h flow self-cleaning type inlet air filter housing for Compressors

Introduction of Self Cleaning Air Filter cartridge dust collector:

Self Cleaning Air Filter cartridge dust collector are used in all types of compressed air stations, especially for multi-stage centrifugal, screw and vane air compressors. The small capacity air compressors can use one dust collector together, and one large capacity air compressor can use one dust collector by itself. Under the negative suction pressure of the compressor, the self-cleaning inlet filter draws in ambient air. When the air passes through the high-efficiency filter cartridge, a part of the coarse particles in the airflow settles to the bottom of the filter under the action of gravity and inertia. 

Technical data of Self-clean Air Dust Collector:

Working principle of Self-cleaning air filter
After the aerodynamic equipment inhales dust-containing air, it will cause wear and tear of the equipment, and the inhaled dust will scale on the surface of the fan blades, resulting in a decrease in the dynamic balance accuracy of the rotor in the equipment, and its working life is greatly shortened. Harmful chemical components can cause equipment to rust and corrode. Therefore, aerodynamic equipment must be equipped with high-precision air filters. ZKL series self-cleaning air filters are improved and perfected in the air intake requirements of similar air compressors at home and abroad. At present, the product performance fully meets the air intake requirements of industrial gas turbine blast furnace blast air compressors.

Advantages of self-cleaning dust collectors: 
1. The front filter is designed to prevent the intestation of catkins, leaves and waste paper. The secondary filter cotton is installed at the filter inlet to filter most of the dust, reduce the burden on the filter cartridge and prolong its service life.
2. Computer-controlled mechatronics products, easy to install, just equip pipe, power, ventilation can work.
3. High filtration efficiency, filtration accuracy is 1-2 microns.
4. The resistance is low, the initial pressure difference is less than or equal to 150Pa.
5. Small footprint: this product is a building block structure, the mainframe can be stacked.
6. Long service life, parts use imported products.
7. Easy to maintain, the filter cartridge can be replaced online without stopping the machine.

Application :

Air Self-cleaning dust collectors are used in all types of compressed air stations, especially for multi-stage centrifugal, screw and vane air compressors. 



http://findtextile.com/store/chinafilters


More filter material you can choose
1.100% cellulose (H&V material)
2.80% cellulose+20%polyester (H&V material)
3.80% cellulose+20%polyester Flame retardant (H&V material)
4.Nano-web
5. Nano-web Flame retardant
6.Polyester(white,black for choose)
7.Polyester+Flame retardant
8.Polyester+oil,water resistant
9.Polyester+Antistatic
10.Polyester+PTFE membrane+Antistatic
11.Polyester+PTFE membrane

Other popular products we have 
fume dust extractor
filter fume aspirator
welding fume collectors
air dust collector filter
polyester filter cartridge for dust collector
Long Filter Cartridge-replace Bag Filter
Four Bolts Cap Filter Cartridge
Two Bolt Thread Filter Cartridge
Three Lug Filter Cartridge
Stainless Steel Three-lug Loaded Filter Cartridge
Stainless Steel Flange Filter Cartridge
Pleated Dust Collector Filter Cartridge
Multifit Pleated Bag cartridge filter
May Cap Filter Cartridge
Square End Cap filter cartridge
Three Pawl Spin Filter Cartridge
Top Open/bottom Closed With Hole Filter Cartridge
Top/bottom Open Filter Cartridge
Antistatic Filter Cartridge
Repalcement WAM Filter Cartridge
Amano air filter
PTFE Membrane Filter Cartridge
Conical/Cone Filter Cartridge
Pleated Bag Filter
Gas Turbine Air Filter
three lug cartridges for dust collectors D145 mm
plasma cutting cartridge fume collector filters
dust collector system with two bags

FAQ 
Q: How to choose a dust collector?
A: Please contact us and tell us your filtration dust type, working temperature and airflow. Our professional engineer will select the suitable model for your application.

Q: What is the delivery time for dust collector?
A: It depends on QTY and type of dust collector. The typical delivery time for a cartridge dust collector is 2~3 weeks and 4 weeks for a bag dust collector.

Q: How can we get the quotation of cartridge air filter ?
A: Please let us know the specifications ,such as filter media,dimension,photo(both end cap),apply in which industry,ect