Product Introduction
Baghouse dust collectors stand out due to their ability to handle high volumes of dust laden air using a compressed-air self-cleaning system enabling effective reverse blasting through deformation of the filter bags.
The unit filters sub-micron sized particles in continuous operating mode and with a steady loss of differential pressure.
Our line of baghouse dust collectors includes sealed mechanisms as well as doors that provide easy access with very few tools required for maintenance.
We manufacture several styles of pulse jet baghouses to fit different applications and customer preferences. In most cases, we recommend our top entry baghouse lines. These models allow for quick and easy access to the snap band filter bags, and allow for easy removal of individual bags without having to remove others. Our top entry models come with the option for top hatch access or an enclosed walk-in plenum.
We also offer bottom access units (also called bottom/side loading) for use in applications with limited overhead clearance.
Finally, both our top and bottom load units are available in bin vent versions for use on silos, mixers, etc.
Feature
1. High filtration capacity. Models from 16 to 720 filter bags and up to 125 000 CFM capacity..
2. Custom engineering. The systems in the Bagsonix series can be customized based on specific requirements.
3. Bigger volume air bag can be suitable for both high pressure and low pressure air supply.
4. Project integration. Avoids particle accumulation within plants, in order to better comply with NFPA regulations.
5. Standard filter bags. Not limited to obtaining replacement cages and bags from a sole source provider.
Dust Collector's parameter:
Model | PPC128-6 | PPC128-9 | PPC128-10 | PPC128-2×6 | PPC128-2×7 | PPC128-2×8 | |
Volume(m³/h) | 67300 | 100900 | 112100 | 134600 | 157000 | 179400 | |
Air speed(m/min) | 1.2-2.0(Speed varies at different dust points) | ||||||
Filtration aream2) | 935 | 1402 | 1558 | 1869 | 2181 | 2492 | |
Net filtration area(m2) | 779 | 1246 | 1402 | 1713 | 2025 | 2336 | |
No. of bag(pc) | 768 | 1152 | 1280 | 1536 | 1792 | 2084 | |
Resistance(Pa) | 1470-1770 | ||||||
Minus pressure(Pa) | 7000 | ||||||
Dust content at inlet(g/m³) | <1300 | ||||||
Dust emission(g/m³) | ≤0.1 | ||||||
Compressed air | Pressure(Pa) | (5-7)×105 | |||||
| |||||||
Air consumption | 3.6 | 5.4 | 6 | 7 | 8.3 | 9.5 | |
| (m³/min) | ||||||
Pulse valve | Qty(pc) | 12 | 18 | 20 | 24 | 28 | 32 |
Size | 2-1/2″ | ||||||
Elevation valve | Qty(pc) | 6 | 9 | 10 | 12 | 14 | 16 |
Size(mm) | Valve Φ725,air tank Φ100 | ||||||
Discharge device YJD-26 | Outlet 300×300mm Capacity 24m³/h | Double flap valve 305×915 | |||||
Screw conveyor | Model | Dia. Φ300,capacity 21m³/h | N/A | ||||
Gearbox | XWD2.2-5-1/43,power 2.2Kw | N/A | |||||
Air slide | Air slide 250mm,flow rate 2.0m³/m2, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered. | ||||||
Bag size and material | Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/m2,temperature 120°C | ||||||
Insulation area(m2) | 125 | 196 | 205 | 223 | 247 | 262 | |
Total weight(approx.)(Kg) | 24120 | 31680 | 34680 | 43920 | 52680 | 60000 | |
Note 1: Net filtration area means the area of one chamber during dust removing. | |||||||
2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor. | |||||||
Model | PPC128-2×9 | PPC128-2×10 | PPC128-2×11 | PPC128-2×12 | PPC128-2×13 | PPC128-2×14 | |
Volume(m³/h) | 201900 | 224300 | 247600 | 269100 | 291600 | 314000 | |
Air speed(m/min) | 1.2-2.0(Speed varies at different dust points) | ||||||
Filtration area(m2) | 2084 | 3115 | 3427 | 3738 | 4050 | 4361 | |
Net filtration area(m2) | 2648 | 2959 | 3271 | 3582 | 3894 | 4205 | |
No. of bag(pc) | 2304 | 2560 | 2816 | 3072 | 3328 | 3584 | |
Resistance(Pa) | 1470-1770 | ||||||
Minus pressure(Pa) | 7000 | ||||||
Dust content at inlet(g/m³) | <1300 | ||||||
Dust emission(g/m³) | ≤0.1 | ||||||
Compressed air | Pressure(Pa) | (5-7)×105 | |||||
| |||||||
Air consumption | 10.7 | 12 | 13.1 | 14.3 | 15.5 | 16.7 | |
| (m³/min) | ||||||
Pulse valve | Qty(pc) | 36 | 40 | 44 | 48 | 52 | 56 |
Size | 2-1/2″ | ||||||
Elevation valve | Qty(pc) | 18 | 20 | 22 | 24 | 26 | 28 |
Size(mm) | Valve Φ725,air tank Φ100 | ||||||
Discharge device YJD-26 | Outlet300×300mm,Capacity 24m³/h | Double flap valve 305×915 | |||||
Screw conveyor | Model | Dia. Φ300,capacity 21m³/h | N/A | ||||
Gearbox | XWD2.2-5-1/43,power 2.2Kw | N/A | |||||
Air slide | Air slide 250mm,flow rate 2.0m³/m2, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered. | ||||||
Bag size and material | Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450gm2,temperature 120°C | ||||||
Insulation area( m2) | 277 | 292 | 307 | 322 | 337 | 352 | |
Total weight(approx.)(Kg) | 66480 | 72000 | 78480 | 86400 | 93600 | 100800 | |
Note 1: Net filtration area means the area of one chamber during dust removing. | |||||||
2: The compressed air consumption is based on supply of compressed air pipe from a air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor. | |||||||
Company information:
Henan Zhengzhou Mining Machinery Co., Ltd. was founded in 1956 and it is the designated manufacture plant of National Mechanical & Electrical Industry Bureau in Henan Province for cement building materials and beneficiation equipments. After more than half a century of development, Henan Zhengzhou Mining Machinery Co., Ltd has developed to an area of 70000 square meters, plant construction area of 40000 square meters with six modern workshops, two heavy machinery workshops, one Municipal Technology Center and more than 260 sets of machining, assembling, welding and other equipments. Its fixed asset value has exceeded 100 million RMB. Henan Zhengzhou Mining Machinery Co., Ltd has become an integrated modern enterprise with scientific research, design, development, manufacturing, sales, installation, commissioning and training services.The main products of company include: ball mill, rotary kiln, vertical preheater, cooler, crusher, metallurgical coke oven, magnetic separator, flotation machine, classifier, feeder, bucket elevator, preheater, dust collector, elevator, drier, and other equipments relate to metallurgy, cement, lime, mineral processing, refractory, chemical industry. The products of Henan Zhengzhou Mining Machinery Co., Ltd have been sold to every province of China and exported to Russia, Korea, Vietnam, Malaysia, Nepal, Bangladesh, Mexico, Armenia, Africa, South America and other countries and regions.
Packaging Detail:
The main machinery is in nude packing and spare parts in Wooden or steel box standard export packing, suitable for long distance delivery.
We can arrange the shipping to your door.
FAQ:
According to your requirements,the most suitable machines will be designed for your workpieces please indicate the following details.
1.what kind of workpiece will you clean ?
2.The workpiece size,length ,width and height of maximum workpiece?
3.How many workpiecs do you want to clean per day ?
Based on this question,the detailed technical proposals will be sent to you for reference.
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
Email: [email protected]
Ningnan Ningnan Automobile Parts Center Ruanjian Blvd, Yuhuatai District, Nanjing, Jiangsu, China
