Model NO.
WMR-250
Function
Night Vision, Waterproof, Dustproof
Definition
420TVL
Chip
CMOS
Waterproof Grade
IP68
Mimimum Illumination
0.1lux
Optional
LED or Infared Lamp
Power Supply
DC12V
Transport Package
Packing in Cartons by Sea
Trademark
WEMAER
Origin
Guangzhou, China
HS Code
8525801390
Production Capacity
12000sets/Month
After-sales Service:
Warranty & Technical Support
Warranty:
12 Months
Applicable Model:
Car, SUV, Truck
Shell Material:
Alloy
Display Type:
Reverse Image
Interface:
RCA
Universal Waterproof Night Vision Front/Rearview Car Camera
1.Product Features:
1) Original fitting by replacing the shelf of license light or Universal installation
2) Smart size for hidden installation.
3) 1/3"CCD
4) Lens: 170 degrees
5) Waterproof and dust-proof (IP68) CCD camera
6) With car reversing reference line(optional)CCD camera.
7) License light available on partial models.
8) Night vision available and high definition CCD camera.
9) Day /Night sensor for automatic adjustment, minimum illumination auto fill light.
2.complete set of equipment
1) 1×camera
2) 1×video extention wire
3) 1× power extention wire
4) 1×User Manual
3.Technical Parameters
4.Installation Guides:
1) Get out the license light;
2) Get the rear view lens lines across the license light original position;
3) Fasten the camera with the buckle which place in the two sides of the camera;
4) Connect the lens built-in license light power lines to the original license light power lines;
5) Connect the reverse lens switching lines;
6) Connect the camera's signal line to the signal extension line;
7) Connect the car's reverse light line to camera's video cable;
8) Check if all lines are correct connected and arranged;
9) Debug the working effects of the camera and the license light;
10) Cover the car trunk. Finished.
Installation:
A: Display screen
B: Camera
C: Video extention wire
1.Product Features:
1) Original fitting by replacing the shelf of license light or Universal installation
2) Smart size for hidden installation.
3) 1/3"CCD
4) Lens: 170 degrees
5) Waterproof and dust-proof (IP68) CCD camera
6) With car reversing reference line(optional)CCD camera.
7) License light available on partial models.
8) Night vision available and high definition CCD camera.
9) Day /Night sensor for automatic adjustment, minimum illumination auto fill light.
2.complete set of equipment
1) 1×camera
2) 1×video extention wire
3) 1× power extention wire
4) 1×User Manual
3.Technical Parameters
| Image Sensor | 1/3color digital sensor |
| Image Format | NTSC 50HZ/PAL 50HZ |
| Effective Pixel | 656*492 |
| Waterproof Index | IP67 |
| Viewing Angle | 170degrees |
| Mimimum Illumination | 0.1Lux |
| Storage temperature | -40ºC-85ºC RH95% MAX |
| Working Temperature | -30ºC-80ºCRH95% MAX |
| Working Humidity | 0%-90% |
| Resolution | 420 TV Lines |
| Power supply | DC12V+10% |
| Current consumption | No more 150mA |
| S/N radio | More than 48dB |
| Sync system | Internal |
| Warranty | 12 months |
| Scanning system | 2:1 interlace |
| Horizontal sync frequency | 15625KHZ |
| AGC | AUTO |
| BLC | AUTO |
| Video output | 1.0Vp-p, 75Ω |
4.Installation Guides:
1) Get out the license light;
2) Get the rear view lens lines across the license light original position;
3) Fasten the camera with the buckle which place in the two sides of the camera;
4) Connect the lens built-in license light power lines to the original license light power lines;
5) Connect the reverse lens switching lines;
6) Connect the camera's signal line to the signal extension line;
7) Connect the car's reverse light line to camera's video cable;
8) Check if all lines are correct connected and arranged;
9) Debug the working effects of the camera and the license light;
10) Cover the car trunk. Finished.
Installation:
A: Display screen
B: Camera
C: Video extention wire
Send Message
