Metal Housing HD Universal License Plate Car Reversing Vehicle Camera, License Plate Reversing Camera, Universal License Plate Camera

1)Exquisite high cleass metal housing design ,

2)waterproof,and day/night vision
 
3)Wide viewing angle 170 degree
 
4)Color of Tarnish and silver optional
 
5)4 kinds of image sensors available:PC7070 480TV lines CMOS, PC3030 480TV lines CMOS, MT9V136 Analog CCD 480TV lines, PC1089 520TV lines CMOS (CCD level)
 


Specification: 
Image sensor: PC7070 (standard one in default) 
1. Effective pixels: 682*504 pixels 
2. Video output: 1Vp_p± 10% 
3. Scanning system: 2: 1 interlace 
4. Minimum illumination: 0.01 Lux/F=1.2(0 Lux with IR on) 
5. Operation temperature: -20° C - 75° C, RH 95% MAX 
6. TV system: PAL/NTSC 
7. Sensing area: 3.8 mm *2.9 mm 
8. SNR: >47.2dB 
9. Lens angle: 135° /170° 
10. Resolution: 480 TV lines 
11. Shutter speed: 1-1/10000 
12. White balance: Auto 
13. Waterproof: IP67/68 
14. Power supply: Analog: 2.8V, HVDD: 2.8V, CVDD: 2.8V 
15. Working temperature: -20° C - 70° C, RH 95% MAX 


Installation Guides:
1. Get out the license light;

2. Get the rear view lens lines across the license light original position;

3. Fasten the camera with the buckle which place in the two sides of the camera;

4. Connect the lens built-in license light power lines to the original license light power lines;

5. Connect the reverse lens switching lines;

6. Connect the camera's signal line to the signal extension line;

7. Connect the car's reverse light line to camera's video cable;

8. Check if all lines are correct connected and arranged;

9. Debug the working effects of the camera and the license light;

10. Cover the car trunk. Finished.


Specifications for different image devices