Model NO.
Rail Fastening
Customized
Customized
Certification
ISO14001, ISO9001
Type
Railroad Fasteners
Size
Customization
Standard
E-Clip, Skl, Kpo, Nabla, Wj
Surface
Plain or as Customer Requirement
Packing
Bulk in Carton, Then on Pallet, or Accord
Trademark
AGICO
Transport Package
Bulk in Carton, Then on Pallet, or Accord
Specification
780x375x585MM
Origin
China
KPO Rail Fastening System
| KPO clip | Screw spike | HS bolt | Hex nut | Double coil spring washer | Base plate | |
|---|---|---|---|---|---|---|
| Pieces required | 2 | 2 | 4 | 2 | 2 | 1 |
| Raw material | Q235 | Grade 4.6: Q235 Grade 5.6: 35# Grade 8.8: 45# | Grade4.6: Q235 Grade5.6: 35# Grade8.8: 45# | Grade 5: 35# Grade 8: 45# | 65Mn | Casting iron QT500-7, QT450-10, or forging low carbon steel or high carbon steel |
| Type | KPO3, KPO6, KPO9 | M24×150mm M24 ×160mm M24 ×180mm | HS26, HS32 | As ordered | As ordered | UIC54,UIC60, 50kg rail, 60kg rail,S49 in ordered size |
| NOTE | Standard: DIN5906 | Standard: ISO898-1, UIC864-1 & NF F500-50 | Diameter: 22mm or 24mm Length: 55mm, 65mm, 75mm, 90mm | Standard: DIN985 | Standard: UIC864-3 | Standard: UIC864-6 |
SKL Clip (SKL3 / SKL12 / SKL14) Rail Fastening System
| SKL tension clip | Ss35 screw spike | Flat washer | Plastic dowel | Guide plate | Rail pad | |
|---|---|---|---|---|---|---|
| Pieces required | 2 | 2 | 2 | 2 | 2 | 1 |
| Material | 60Si2CrA, 60Si2CrA, 38Si7 | Grade 4.6: Q235; Grade 5.6: 35# Grade 8.8: 45# | Q235 | HDPE, Reinforced Nylon 66 (PA66) | Reinforced Nylon 66 (PA66) | EVA, or rubber |
| Size | skl1,skl3,skl12,skl14 | M24×150mm | Uls7 | For different sizes of screw spike | UIC54, UIC60, 50kg rail, 60kg rail, and other sizes as ordered | |
| NOTE | Hardness: 42-47HRC 5 millions cycles without breaking Standard: DIN17221, GB/T1222 | Standard: ISO898-1, UIC864-1 and NF F500-50 | Standard: EN10025, EN10139 | To insert into concrete sleeper | Customized products available | |
SKL-14 Rail Fastening System (AREMA Standard)
| Angled Guide Plate | Rail Pad |
| Plastic Nylon Screw Dowel | Flat Washer |
| Screw Spike | SKL14 Tension Clamp |
| Composition | Rail Tension Clamp | Angled Guide Plate | Rail Pad | Screw spike | Flat washer | Plastic dowel |
|---|---|---|---|---|---|---|
| Type | SKL14 | Wfp14K-12 | As drawing | 24*161mm | As drawing | As drawing |
| Material | 60Si2CrA | PA66 | EVA | 35# steel | Q235 steel | PA66 |
| Weight (kg) | 0.495 | 0.17 | 0.17 | 0.635 | 0.048 | 0.072 |
| Requirement | HRC41-46 | black | 6mm | L=135mm |
E-clip Rail Fastening System
| E-clip | Shoulder | Rail Pad | Insulator | |
|---|---|---|---|---|
| Pieces required | 2 | 2 | 1 | 2 |
| Material | 60Si2MnA, 60Si2CrA | QT500-7, QT450-10 | HDPE, rubber or EVA | Reinforced Nylon 66 (PA66) |
| Size | Dia. 16mm,18mm or 20mm (E1809, E2006,E2007,E2009,etc) | For UIC54, UIC60, 115RE, BS80lbs, BS100lbs, 50kg rail, 60kg rail, etc. | ||
Note: Hardness of E-clip is 44-48HRC;Toe Load for E-clip is 500-700kgf (Dia.16mm); 750-900kgf(Dia.18mm); 1100-1400kgf(Dia.20mm); Fatigue life of E-clip is 5 millions cycles without breaking DIN17221, BS970, GB/T1222 qualified E-clip | ||||
Nabala Clip (Spring Blade) Rail Fastening System
| Nabla clip | Insulator | Screw spike | Spring washer | |
|---|---|---|---|---|
| Pieces required | 2 | 2 | 2 | 2 |
| Material | 60Si2MnA, 60Si2CrA | Reinforced Nylon 66 (PA66) | Grade5.6:35# | ML08AI |
| Size | 4mm or 4.5mm thick | UIC54,UIC60, 50kg rail,60kg rail | 18.25x34x78mm | |
| Note | 42-47HRC 3 million times without breaking Application for different rail type | Density:1.3-1.45g/cm3 Tensile strength:≥170Mpa Elongation:≤4.4% Bending Strength:≥250Mpa Impact Strength(No gap):≥80KJ/m2 Melting point:250-270ºC Insultion resistance:≥1X108Ω Glass fiber content:30-35% Hardness:≥110HRR | Tensile strength:≥500Mpa Yield strength:≥300Mpa Elongation:≥20% Cold bending:90 degree without crack | Chemical composition(%): C:0.05-0.10, Mn:0.30-0.60, Si:≤0.1, Cr:≤0.2, P:≤0.035, S:≤0.035 |
Here are some other types of rail fastening systems for your reference.
