Precision Machining Parts, Machined Parts, Casting and Machining, Casting Parts Railway Parts, Steel

Lost Wax Casting (Investment Casting)

Lost Wax Casting is also known as investment casting.It can produce complicated shapes that would be difficult or impossible by normal manufacturing techniques. Parts made with investment castings often do not require any further machining, because of the close tolerances that can be achieved.
Shanghai Sourcing adds value in the process through:
(1) Fluent technical communication in English. In our experience, most foundries in China need a lot of help in this area.
(2) We provide an extra layer of quality control for you. For example, we run independent chemical composition and mechanical strength analysis.
(3) We also have CNC machining expertise/ resources that many foundries lack.
Introduction of Lost Wax Casting:
It is generally used for small castings are made from almost any metal, especially stainless steel.
This process generally more expensive per unit than die casting or sand casting but with lower tooling cost. It can produce complicated shapes that would be difficult or impossible by normal manufacturing techniques. Parts made with investment castings often do not require any further machining, because of the close tolerances that can be achieved.
Advantages of Lost Wax Casting:
1. Excellent surface finish
2. High dimensional accuracy
3. Extremely intricate parts are castable
4. Almost any metal can be cast
5. No flash or parting lines

Types of Lost Wax Casting
Sodium Silicate Investment Casting (Water Glass Also Called Sodium Silicate):
1. The coasting bond brushed on the pattern surface is water glass in this process.
2. Compared with the sand castings, Parts madewith lost wax casting(water glass) have better surface quality (surface roughness to 12.5 microns) and higher dimensional accuracy.

Silica Sol Investment Casting:
1. The coasting bond brushed on the pattern surface is silica sol in this process.
2. Parts made with lost wax casting(silica sol) have the tolerances are 0.1 mm for the first 25 mm (0.005 in for the first inch) and 0.02 mm for the each additional centimeter (0.002 in for each additional inch).
3. A standard surface finish is 1.34 microns (50125 μin). Compared with the water glass process, Parts made with lost wax casting(silica sol) have betterexcellent surface finish and higher dimensional accuracy.


Process availablesilica sol and sodium silicate (soluble glass)
Material availablestainless steel, carbon steel, Alloy Steel, WCB, Tool Steel and etc.
Weight10g-200kg
Accuracyclass CT4-CT7
Surface roughnessup to Ra1.6 ~ Ra6.3
Applied softwarePro/E, Auto CAD, Solid Work 2001,CAXA, UG, CAD/CAM/CAE
Production capacitymore than 2,000MT per year
heat treatment:anneal, quenching, normalizing, carburizing ,polishing, plating
MachiningCNC and NC machining, turning, milling, drilling, boring, threading, grinding machines and test facility
CertificationObtain ISO9001:2008 Quality System Certified and CE/PED Certified by TUV