China DJK5-1 Subway fastening system
1. This fastening is elastic separate type, apply to 50 kg/m rail yard line rolls inspection pit and short pillow whole ballast bed area.
2. Fasteners technical indicators:
(1) Fastening and casting die for National rail transit elastic strip (φ13), divide into A and B two types. Rail junction 6, 8 joint mat used type B type elastic strip, other parts are used A type elastic strip. Tighten to play a central front chin contact rail pad shall prevail. Tightening torque for 100~120KN/mm.
(2) Vertical static stiffness of fastener node for 30~50KN/mm.
(3) A set of fasteners climbing resistance of not less than 11KN.
(4) Embedded nylon casing pull-out force greater than 60KN.
(5) The resistance value of insulation parts are greater than 108Ω.
(6) Rail pad divide into the middle and joint two types, each has 6, 8, 10, 12, a total of four number. 6,12 number to adjust the gauge for later use.
(7) Gauge to adjust the amount of + 8, -12 mm, maximum horizontal adjustment quantity is 30 mm (Iron plate on the mat is 10mm, Iron plate under the mat is 20mm).
