Model NO.
ZZ1257N4647P1
Transmission Type
Manual
Power
Diesel
Load Capacity
21-30t
Emission Standard
Euro 4
Tank Volume
25000 Liters
Drive Wheel
6×4
Seats
≤5
Horsepower
380HP, 340HP, 420HP
Engine Capacity
9.726L
Storage
Oil
Tire Certification
ECE, GCC, ISO, DOT
Tire Design
Tubeless
Condition
New
Cab
A7-W Lengthen with AC
Engine
D12.38-40 Euro4
Transmission
HW19710, 10 Forward 2 Reverse
Steering
ZF8118 Left Hand Drive ( Rhd Option)
Front Axle
HF9 9tons Heavy Axle
Rear Axles
HC16 16tons Heavy Axle
Tyres
12R22.5 Tubeless
Exhaust
Front Exhaust
Compartment No
Customized
Tanker Materiel
Carbon Steel, Stainless Steel, Aluminum Alloy etc
Trademark
SINOTRUK
Transport Package
Nude
Specification
10650x2550x3650mm
Origin
Shandong, China
HS Code
8716319000
SINOTRUK HOWO A7 6x4 FUEL TANK TRUCK SPECIFICATIONS | |||||
Manufacture | Made in 2018 year | CNHTC, China | |||
Cubage | 20000L with compartment customized , it has a man hole to put in fuel and a drain valve to flow out fuel by gravity. With one fuel pump(76YCB-40 output:50cbm/h.) and one return to zero flow meter | ||||
Weight in kg | Kerb weight (Kg) | 12590 | |||
Gross vehicle weight (Kg) | 3000 | ||||
Dimension | Dimensions | Length(mm) | 10650 | ||
Width(mm) | 2550 | ||||
Height(mm) | 3650 | ||||
Wheel base (mm) | 4600+1350 | ||||
Performance | Maximum driving speed (km/h) | 92 | |||
Fuel consumption (1/100 km) | 35 | ||||
Cab | Model | SINOTRUK A7-W Lengthen cab | |||
single bunk,new type seat,adjustable steering wheel,EURO new type heating & ventilating system,German VDO instruments,safety belts, exterior sun visor,stereo radio/cassette recorder,left driving,air conditioner | |||||
Engine | Model | D12.38-40(Euro 4) | |||
Type | 6-cylinder in line, 4-stroke, water-cooled, turbo-charged & inter-cooled, direct injection | ||||
Horsepower | 380 HP ( 340hp ,420hp for option ) | ||||
Maximum output Kw/r/min | 273/2200 | ||||
Maximum torque N.m/r/min | 1460/1300-1600 | ||||
Bore x Stroke | 126x130mm | ||||
Valve | 2 | ||||
Displacement | 9.726L | ||||
Make SINOTRUCK (CNHTC), Euro II emission standard, Thermostat with 80ºC opening begin, Rigid fan | |||||
Transmission | SINOTRUK HW19710 transmission ,10 forward and 2 reverse | ||||
I II III IV V VI VII VIII IX X | |||||
14.28 10.62 7.87 5.88 4.38 3.27 2.43 1.80 1.34 1 | |||||
R1-13.91 R2-3.18 | |||||
Clutch | SINOTRUK Φ430 diaphragm-spring clutch,hydraulically operating with air assistance | ||||
Steering | ZF8118 Steering Gear Box ,hydraulic steering with power assistance.(Left hand driving) | ||||
Front Axle | SINOTRUK HF9 Front Axle,new 9-ton front axles of equipped with drum brakes. | ||||
Rear Axles | SINOTRUK HC16 Heavy reduction drive axle,STR hub-reduction with differential locks between wheels and axles, enforced STR axle,ratio:4.8;The basic configuration of HOWO series construction vehicle can be used in such bad environment as bad road condition, heavy impact and overloading, which is the best choice for heavy construction vehicle customers. | ||||
Brake System | Service brake:dual circuit compressed air brake Parking brake (emergency brake):spring energy,compressed air operating on rear wheels | ||||
Wheels & Tyres | Rims:10 hole-steel ;Tyres:12R22.5 tubeless tyre with 1 Spare tire.( other for option ) | ||||
Electrics | Operating voltage:24V,negative grounded Starter:24V,7.5 Kw Alternator:3-phase,28V,1500 W Batteries:2x12 V,165 Ah horn,headlamps,fog lights,brake lights,indicators and reverse light. | ||||
Oil Tank | Square type-400L Aluminum alloy fuel tank | ||||
OPTIONS | Revolving Light on roof of cab | ||||
RHD right hand drive | |||||
Upper body | volume: 4000L - 35000L | ||||
Refueling gun, different compartment, bottom fueling system(explosion proof manhole cover, oil and gas recovery system, anti-overflow system) | |||||
Tires: 12R22.5 , 315/80R22.5 , 13R22.5 tubeless , 12.00R20 radial etc | |||||
ABS, EVB engine brake etc |
Fuel Tank Truck Introduction |
Our tank trucks for transporting light fuel oil are divided into two categories: oil trucks and fuel trucks. They are mainly used for light fuel oil such as gasoline, diesel and kerosene. Transport and refuel, if necessary, transport and fill other non-corrosive liquids. The tank trucks produced by our company have the advantages of reasonable design, fine manufacturing, excellent materials and excellent performance. The main technical indicators are in line with the requirements of GB18564 and QC/T653 standards. |
Main Structure and Working Principle |
The tank truck (for example, large-tonnage sprinklers) is mainly composed of a car chassis, a tank assembly, a pipeline system, an oil hose, a mopping tape, and a protective device. |
1.Truck chassis 2.tank body 3.manhole cover 4.the force and transmission system 5. side protection device 6.the pipeline system 7. fire extinguisher 8. mopping floor tape 9.rear bumper 10.rear ladder |
Tanker Body |
The tank body is a metal atmospheric pressure tank, which mainly has carbon steel tanks, stainless steel tanks and aluminum alloy tanks. The working pressure of the tank body is not more than 72KPa, and the working temperature of the tank body is -40~+50°C. The inside of the tank is equipped with a wave-proof plate, and some of the tanks are equipped with a longitudinal oil-blocking plate to reduce the impact of the oil in the tank on the head and the barrel. There is a sedimentation tank and a sewage outlet at the bottom of the tank. The sewage outlet can be opened irregularly according to the situation, and the water and dirt stored in the sedimentation tank can be released. Integrated with the sedimentation tank, there is also an oil drain port through which the oil drain pipe can be connected to form a fuel tanker, or the oil pump inlet pipe can be connected to form a fuel truck. The upper part of the tank body is provided with a safety frame, which is mainly for ensuring the safety of the user when operating above the tank body, and also for accumulating the oil spilled during the oil filling. |
Fire extinguishing and silencing equipment |
The tank trucks produced by our company are equipped with fireproof caps to facilitate transportation vehicles to enter the oil depot or gas station. In addition, customers can also install fire muffler, and vehicles equipped with fire muffler can be equipped without fireproof caps. |
Bottom fueling system |
Some models have a bottom refueling system. The bottom refueling system mainly consists of an explosion-proof manhole cover, a piping system, an oil and gas recovery system, an anti-overflow system and a pneumatic control system. |
Different Capacity & Options for Reference |
SINOTRUK Production Lines |
Packing & Delivery |