Model NO.
FL404
Size
Large
Condition
New
Engine
Yto, Yuchai
Gearbox
16f+8r, Creeper or 8f+8r Shuttle
Rops and Cabin
Ec and Oecd
Hydraulic Output
3 Groups
Transport Package
CBU
Specification
4370MM*2100MM*2760MM
Trademark
Farmlead
Origin
China
HS Code
87019310
Production Capacity
15000 Sets/Year
Type:
Wheel Tractor
Usage:
Farm Tractor, Garden Tractor, Lawn Tractor
Certification:
ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC
Drive Wheel:
4WD
Emission Standard:
Euro III
Fuel:
Gas / Diesel
FL1004
FL80-120 series
HOT SALE technical features:
Other terms:
3. Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
ABOUT DEUTZ-FAHR MACHINERY CO.,LTD
DEUTZ-FAHR MACHINERY COMPANY LTD. is a subsidiary company of Italian SAME DEUTZ-FAHR GROUP. We are available to provide customers with a full range of products, including tractors, harvesters. Covered area 45,000 square meters with 700 employees. We adopt Italy SDF group quality control management system and advanced production system. So we can supply high reliability and good performance tractors and harvesters to the farmers from all over the world.
There are over 460 dealers and service channels covering all the market area. We take "satisfy the customers" as our target, provide "3 Full" (Full course, Full time, Full hearted) service.
After-sales service polices:
FL80-120 series
HOT SALE technical features:
- Modern design, superior performance, wide vision, comfortable operation;
- Optional six-cylinder engine, upgraded performance and technology, large torque reserve, with strong power;
- Optional creeper, air-conditioning cabin, able to fit various working environments;
- Various optional PTO speeds, able to match wind range of implements, more practical.
| Main parameters | FL804 |
| Engine Type | YC |
| Max. Torque (Nm @ engine rpm) | 340-375@1440-1640 |
| Displacement (L) | 4.578 |
| Fuel tank capacity (L) | 140L |
| Rating power of engine | 59/2300 |
| Fuel consumption @ nominal power | ≤235 |
| Air Intake Type | NA |
| N / Displacement | 4/4.578 |
| No. of gears | 16F+8R/4×(2+1)×2 |
| Shift method | Sliding sleeve |
| Max. speed | 32.22km/h |
| Gear position | Command aside |
| PTO Speed | 540/1000 |
| The whole machine size (dimensions) mm | 4370X2100X2760 |
| Min. operation mass (kg) | 4105(W/cabin)/3805(W/Ocabin) |
| Mini turning Radius (m) | 4.9 |
| Rated traction force(KN) | 17.3 |
| Deck | Flat Deck |
| Wheelbase(mm) | 2270 |
| Minimum ground clearance(mm) | 375 |
| Tyre size | 11.2-24/16.9-34 |
| Steering type | Hydraulic steering |
| Steering Angle (4 x4) | 43.8 |
| Main parameters | ||
| Type | FL404 | |
| Drive type | four-wheel drive | |
| Engine | ||
| Engine Brand | Quanchai | |
| Engine Type | QC490T40 | |
Max. Torque (Nm @ engine rpm) | 155~160/1700 | |
| Fuel tank capacity (L) | 38L+22L=60L 48L+22L=70L | |
Rating power of engine KW/RPM | 29.4/2400 | |
Fuel consumption @ nominal power (g/kw.h) | ≤248 | |
| Air Intake Type | Natually-Aspirated | |
| Displacement L | 4/2.672 | |
| Air filter type/size | ||
| Torque reserve | 23% | |
| Transmission system | ||
| Clutch type/size | One-piece,dry,double-action/10 inches | |
| No. of gears (F+R) | 8F+4R/8F+8R/12F+12R | |
| Shift method | mechanical sliding sleeve | |
| Max. speed | 34.78 | |
| Gear position | side position | |
| Hydraulic system | ||
Hydraulic output flow rate (L / MIN) | 38.4 | |
Hydraulic output valve | One group/Two groups/Three groups/Simple hydraulic output | |
Hydraulic filter types and capacity | wire mesh/63μm | |
| Working device | ||
| Three-point-linkage | 1 Type/2 Type (Optional) | |
| PTO Speed | 540/760rpm 540/1000rpm(Optional) | |
| Lifting Capacity kn | 9KN/15KN(Enforced lift) | |
| Tillage depth adjustment | Draft, position,position and draft mix control/position,float(Enforced lift) | |
| Parameter | ||
The whole machine size (dimensions) mm | 3790×1520×2130 3790×1620×2130 | |
| (kg) Min. operation mass | With cab | 2300 |
| Without cab | 2120 | |
| Wheel base (mm) | 1992 | |
| Mini turning Radius (m) | 3.8 | |
| Rated traction force(N) | 11 | |
| Deck | Flat Deck | |
| Minimum ground clearance (mm) | 325 | |
| Heat ventilation cab | Optional | |
| Front/rear wheel tread | 1200/1200 1250/1300 (common 1300) | |
| tyre size | 8.3-20/12.4-28 | |
| Braking and steering | ||
| Braking system | Wet type,disc brake | |
| Steering type | hydraulic steering | |
| Steering Angle (4 x4) | Front axle Max.Steering angle 30°/50° | |
(options: all these types can Optional for ROPS ,Sunshade,swing drawbar, front/rear ballast,cabin) | ||
Other terms:
1. Delivery: 30 days for normal orders
2. Price: We have price on basis FOB Qingdao and CIF your destination for your choice3. Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
ABOUT DEUTZ-FAHR MACHINERY CO.,LTD
DEUTZ-FAHR MACHINERY COMPANY LTD. is a subsidiary company of Italian SAME DEUTZ-FAHR GROUP. We are available to provide customers with a full range of products, including tractors, harvesters. Covered area 45,000 square meters with 700 employees. We adopt Italy SDF group quality control management system and advanced production system. So we can supply high reliability and good performance tractors and harvesters to the farmers from all over the world.
There are over 460 dealers and service channels covering all the market area. We take "satisfy the customers" as our target, provide "3 Full" (Full course, Full time, Full hearted) service.
After-sales service polices:
- FARMLEAD tractor is offered 12 months of warranty period of the tractor, which shall start from the 3 month as the shipment date.
- FARMLEAD will offer free service parts in warranty period, and there is no charge for related work hours and indirect expenses.
- Service training
Send Message
