Overall Dimensions(LxWxH) mm | 4360×2462×2766 |
Service Mass(with dozer blade) kg | 6890 |
Track (mm) | 1435 |
Track shoe width (mm) | 390/530 |
Diesel Engine Model | LR6B5-22 |
Rated Power(kW) | 66.18 |
Rated Sspeed (r/min) | 2200 |
Theoretical Speed / Tractive Force | km/h/kN |
Forward Gears | Gear/Speed |
Gear- I | 3.18/49.31 |
Gear- II | 4.07/46.30 |
Gear- III | 6.62/26.13 |
GearIV | 9.63/16.11 |
Reverse Gears | |
Gear - I | 4.10 |
Gear - II | 6.35 |
Dozer Blade | |
Type | Fixed Straight Blade |
HxW (mm) | 850×2462 |
Depth Into Soil (mm) | 290 |
Lifting Height (mm) | 625 |
90HP crawler tractors. This type of tractor is based on C902 tractor; however, it is more suitable for bulldozing operations due to its adoption of(4F+2R)sliding gear transmission. Quality built and economically priced, our crawler tractor is widely used for irrigation, pond renovation, small town construction and so on.
Main Features :
2) adopt LR6A3L-22 diesel engine to start up good performance, save energy and reduce consumption.
3) (3+1) * 4 composition meshing sleeve shift gearbox, wet steering clutch rear axle, with wide scope of operation and high reliability;
4) the torsion bar shock absorption walking system has strong bearing capacity and good damping effect.
5) electric control independent power output, easy to operate;
6) load sensitive hydraulic system with precise control and low energy consumption. The electrically controlled suspension system has the functions of force adjustment, bit adjustment and force position comprehensive adjustment, and is easy to use.
7) brand new cab with beautiful appearance and air conditioning.
The C1802E rubber tracked tractor is mainly based on large area farm operations, and can be equipped with different farm implements for farming, finishing, raking and sowing. The 6K series diesel engine has good starting performance, energy saving and consumption reduction. The use of (3+1) * 4 composition meshing sleeve shift gearbox, wet steering clutch rear axle, wide scope of operation and high reliability.
Specification | |
Overall dimensions L*W*H mm | 3200*2380*3149 |
Operating weight kg | 9800 |
Track gauge mm | 1580 |
Wheel base mm | 1850 |
Track width (mm) | 500 |
Ground pressure (kPa) | 50 |
Diesel Engine type | YM6K5LRF22/1330 |
Rated power output (kW) | 133 |
Rated speed (r/min) | 2200 |
Minimum fuel consumption rate (g/ kW.h) | ≤225 |
Oil consumption rate (g/ kW.h) | ≤0.68 |
Torque reserve | 20%~30% |
Hydraulic suspension structure type | Articulated lever type |
Maximum hoisting force of suspension shaft (kN) | 37 |
Model | C1302 Crawler Tractor | |
Overall dimensions(L*W*H)mm | ||
Without dozer blade | 5344*1835*2786 | |
With dozer blade | 5367*2462*2786 | |
Wheel Base (mm) | 2774 | |
Track(mm) | 1435 | |
Track shoe with (mm) | 390 | |
Serving mass (kg) | ||
Without dozer blade | 7300 | |
With dozer blade | 7550 | |
Ground Pressure (kPa) | ||
Without dozer blade | 46.75 | |
With dozer blade | 48.35 | |
Speed, tractive force, forward gears(6F+2Rengagement sleeve transmission) | ||
Gear I (km/h)/ tractive force (kN) | 3.71/52.9 | |
Gear II (km/h)/ tractive force (kN) | 6.6859/32.5 | |
Gear III (km/h)/ tractive force (kN) | 7.798/32.2 | |
Gear IV (km/h)/ tractive force (kN) | 8.996/27 | |
Gear V (km/h)/ tractive force (kN) | 10.591/22 | |
Gear VI (km/h)/ tractive force (kN) | 13.917/14.3 | |
Reverse speed gear I (km/h) | 3.314 | |
Reverse speed gear II (km/h) | 6.289 | |
Diesel engine model | LR6A3Z-22 diesel engine | |
Rated power (Kw) | 95.6 | |
Rated speed (r/min) | 2200 | |
Dozer blade | Fixed straight blade | |
H*W (mm) | 850*2462 | |
Depth into soil (mm) | >290 | |
Max. Lifting height (mm) | >625 | |
