Model NO.
FY5160XFC
Drive Wheel
4×2
Horsepower
251-350hp
Condition
New
Description
HOWO 6 Tons Foam and Water Truck
Loading Capacity
5000 Liters 6000 Liters 8000 Liters
Transport Package
RO-RO. Bulk Shipment
Trademark
FUYA
Origin
Hubei, China
Production Capacity
5000 Units Per Year
Certification:
ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Volume:
5001-7000L
Emission Standard:
Euro 3
Transmission Type:
Manual
Payload:
5-16 Tons
Fuel:
Diesel
| Specification of CLW SINOTRUK HOWO 6 TONS Fire Fighting Truck (5tons Water + 600 liters Foam +500 kg dry powder Type) | |||
| Condition | 4X4, New condition, Right Hand Driving. | ||
| Chassis | Brand | SINOTRUK HOWO | |
| Overall Dimension(mm) | 8100*2500*3850 mm | ||
| Wheelbase(mm) | 4600 mm | ||
| Gross weight kg | 18000 kg | ||
| Curb weight(kg) | 6800 kg | ||
| Loading weight(kg) | 10000 kg 10 tons | ||
| Axle loading(front/rear) (kg) | STR/ ST16 7000 / 16000 | ||
| Max driving speed(km/h) | 90 | ||
| Tire | Quantity | 6 +1 spare tire | |
| Specification | 12R22.5 | ||
| Cab | 2+4 Passengers allowed. | ||
| Flat Head | |||
| Air conditioner, F/M | |||
| Besides standard equipment, 100W alarm,rotary alarm switch, take-off control switch and indicator light available. | |||
| Engine | Brand | Sinotruk, WD615 87 | |
| Fuel type | Diesel | ||
| Displacement (ml) | 9726 | ||
| Max Horsepower (hp) | 290 | ||
| Max Output Power (kw) | 213 | ||
| Maximum torque (N.m) | 1160 | ||
| Cylinder number | 6 | ||
| Emission standard | Euro II | ||
| Gear Box | HW15710C, 10 Forward Gear, 2 Backward Gear. | ||
| Fuel tank | 300 liters | ||
| Upper | |||
| Tanker | Volume(L) | 5600L(5 000L Water+600L Foam+500 kg dyr powder) | |
| Material of tank(foam and water) | High grade Stainless steel 6mm thickness. | ||
| Structure | Steel plate welding, interior guard board. | ||
| Equipment | 2 units of manholes with quick locking and opening device | ||
| 1 units of overflow devices | |||
| 2 units of liquid level indicator | |||
| 2 units of blow down outlets with manual valve control | |||
| Fire Pump | Model | GB40.10/7.50-P2 3010 | |
| Control way | Automatic | ||
| Type | Centrifugal pump High low pressure truck mounted pump | ||
| Flow rate | Low pressure 50L/s at 1.0MPa High pressure 7 L/s at 4.0Mpa. | ||
| Pressure | Low pressure 1.0Mpa, High pressure: 4.0MPa | ||
| Pump suction time | ≤60s7 meters | ||
| Installation form | Rear-mounted | ||
| Pump Suction Depth | 7m | ||
| Pipes pressure | 1.0 MPa-4.0Mpa | ||
| Delivery outlet(B/S type) | 65mm(21/2) | ||
| Pipeline system | External intake pipe | There is an external water inlet on the back side of the pump, the diameter of the pump is Φ150mm, and the outer suction pipe is connected. Interface (small cover seal); suction pipe Φ150 × 4m (2 units). | |
| Inner inlet pipe | 1 Φ150mm rear inlet water, the tank enters the fire pump, and installs 1 Φ150mm Butterfly valve, connecting liquid tank and water pump. | ||
| Outlet pipeline | 2 Φ80mm ball valves and 2 Φ65mm ball valve controlled atmospheric pressure outlets; 1 Φ89mm gun pipe, using Φ80mm flexible joint, and using Φ80mm Ball valve control. | ||
| Water injection pipeline | 1 Φ65mm internal water injection pipeline, which can directly feed water into the tank through the water pump; There is one external water inlet on each side of the body | ||
| Surplus water pipeline | In order to protect the water pump and each ball valve, install a drain valve at the lowest point of the pipeline. | ||
| Cooling water pipe road | In order to make the power take-off work to cope with various complicated situations, it is equipped with a cooling water pipe and a stainless steel ball valve. | ||
| Foam proportioner | Model: Ring pump; Proportion: 6% | ||
| Monitor (Fire artillery) Water monitor Foam monitor | Brand | France POK | |
| Control way | Automatic | ||
| Model | SNAKE STUMPY 2.5/3000F | ||
| Flow rate at rated | 3000 L/Min | ||
| Spraying range | Water >=65m, Foam ≥55 m | ||
| Rated Pressure | 0.7Mpa | ||
| Angle of rotation | ≥3400° (horizontal), -20°~70° (Pitching) | ||
| Foam Proportioning System Design | Model:SmartATP125 0.6-1.2 Mpa working pressure 20-125L/s flow range 1-10% Foam Proportioning rate. Electrical automatic control and with manual for emergency. | ||
Automatic type making it possible to induct foam to the water at the correct Proportioning ratio, independent of pump pressure and discharge | |||
| Equipment box & pump house | Material | The skeleton is high quality steel | |
| Structure | The steel box structure is separated in the equipment box, which is firm and reliable, improving space utilization and variability. | ||
| Door | Aluminum alloy rolling shutters on the left and right sides of the equipment box, light and reliable, low noise | ||
| Flip pedal | Material | Q235A,Skinned pattern aluminum plate | |
| Structure | Safe and reliable with double locking of spring and door stop | ||
| Electrical system | Cab top | Equipped with long row of luxury po lice lights, the alarm power is 100W; alarm,The lamp and strobe circuit are independent additional circuits, and the controller is installed in the cab. | |
| Safety sign light | 4 sign lights are installed on the lower two sides, one turn signal on each side, and a p osition light. | ||
The accessories equipment list
| Item | Item | parameters | unit | quantity |
| 1 | sucking hose | DN150(4m) | piece | 2 |
| 2 | water filter | FLF150 | piece | 1 |
| 3 | water collector | FJ150 | piece | 2 |
| 4 | 20 type water hose | 20-65-20m | Disc | 6 |
| 5 | 20 type water hose | 20-80-20m | Disc | 6 |
| 6 | High pressure water hose | 20m | Piece | 4 |
| 7 | Inlet water hose | 2m | Piece | 5 |
| 8 | triple head distributor | Φ80 inlet Φ65 outlet | piece | 3 |
| 9 | Adapter | Φ80mm×Φ80mm | piece | 2 |
| 10 | Foam gun | PQ4 | piece | 1 |
| 11 | Foam gun | PQ8 | piece | 1 |
| 12 | Straight stream water gun | Φ16 mm | piece | 1 |
| 13 | Straight stream water spray gun | piece | 1 | |
| 14 | Foam sucking hose | DN50 | piece | 1 |
| 15 | Foam pipe wrench | FS150 | piece | 2 |
| 16 | hose protector | rubber | pair | 2 |
| 17 | hose hook | FG600 | piece | 8 |
| 18 | hose gaiter | piece | 8 | |
| 19 | fire hydrant wrench | FB450 | piece | 1 |
| 20 | underground fire hydrantwrench | FBA800 | piece | 1 |
| 21 | Sucking pipe wrench | FS150 | piece | 2 |
| 22 | Sole timber | 500X400X50(mm) | piece | 4 |
| 23 | Rubber hammer | piece | 1 | |
| 24 | Fire axe | piece | 1 | |
| 25 | Fire bucket | piece | 1 | |
| 26 | fire extinguisher | 2kgABC | piece | 1 |
| 27 | Original chassis tools | piece | 1 | |
| 28 | Spare tyre | piece | 1 |
Company scene
1. Good performance, durable and elastic.
2. The lowest price with top quality in China.
3. Standard materials according to technical drawing.
4. OEM service, quality assurance.
5. Professional supplier with many years experience.
Our main products:
1. Dump Truck / Tipper Truck/Side Tipper/End Tipper
2. Fire Fighting Truck / Fire Truck / Fire Vehicle / Fire Engine
3. Truck with crane / Truck mounted crane
4. LPG Tank Truck Trailer/Oil Tank Truck / Fuel Tanker Truck
5. Water truck / Water Tank Truck / Water Sprinkler Truck
6. Concrete Mixer Truck
7. Van truck / Insulated truck/ Refrigeration truck
8. Fecal suction truck / Sewage suction truck,
9. Cement Powder Tank truck/ Bulk cement truck
10. High-altitude operation truck,
11. Self-loading garbage truck, garbage compactor truck, sealed garbage truck,
12. Semi Trailer ( flat bed trailer / skeleton trailer / dump semi trailer / side wall trailer / low bed trailer / van container trailer / warehouse trailer, etc. )
Our Advantages
Our advantage:
a.Competitive Price and Excellent Quality
b.More than 10 years' experience as a manufacturer
c.CCC, ISO, BV certification
d.Perfect after-sale service
e.Customized products available with us,
f.Export covering More than 50 countries and regions
g.Annual production value topped 1500, 000, 000 RMB (240, 000, 000 US dollars) per year
FAQ
FAQ
1,Q: What's the brand of your truck?
A: Our brand is CLW, First it is the biggest truck manufacture in China, our products cover all series such as tractor truck, tipper truck, cargo truck, and other special trucks.
2,Q: How can we trust your company?
A: We are the official authority company by Chengli Special Automobile Co., Ltd. And we are registered in the Commercial Department of China, with the whole qualification for exporting, you would feel relax and safe to do business with us.We are your reliable partner.
3,Q: Can u provide the ISO9001 certificate or some others related?
A: Yes. We have been exporting trucks for years. Rich experience for exporting to different countries, African market, Russia, South America, this help us better know have to handle with different certificates needed.
4,Q: How about warranty item?
A: We could support u original spare parts. And also email or telephone assist in the following days. If necessary, for large quantity ordered, our engineer could go for technical assist.
5,Payment:
30%-50 deposit after order confirmation, balance should be paid before delivery. All by T/T, L/C.
6,Delivery time:
35 working days after payment is received.
Exporting experience
1.58 sets of mili tary water trucks for national defense
2. Dump trucks in support of the United Nations
3. Fuel tank trucks exported to Sudan
4.78 sets of water truck exported to Nigeria
5. Dump trucks exported to the Ivory Coast, Kazakhstan
6.108sets of trucks exported to Libya
7.36 sets of dump trucks exported to North America
8.218 sets of garbage trucks exported to West Africa
9.60sets of water trucks exported to Congo
10. Garbage trucks exported to Vietnam
11.98 sets of dump trucks exported to Ghana
Packaging & Shipping:
1. Naked or waxed before on board.
2. Delivery time: 30 days after receiving payment in advance.
3. By RORO or Bulk ship.
4.
Our warranty:
1. One year quality guarantee for three key parts: Axles, engine, transmission.
2. Other spare part could be supplied by OEM at cost prices.
3. Regularly callback to know the vehicle's working status.
4. The overseas engineers are always ready to deal with unexpected needs.
Contact with me!
HUBEI FUYA Vehicle Co., Ltd
Send Message
