Model NO.
2.5 cbm
Drive Mode
Standard
Maximum Horsepower
Standard
Condition
New
Actual Mixing CapacityTM3
2.5
Mixing Drum CapacityTM3
3.5
Angle of InclinationT0
16
Rotational SpeedTr/Min
0-14
Mixing Drum Vanes
Two Spiral Vanes and Auxiliary Blades
Productivity
4 Batches Per Hour
The Slump of ConcreteTmm
70-260
Oil Pump
Cbf-32
Motor Model
BMS-100
Reduction Box/Speed Ratio
Hj220
Transport Package
Carton Box, Plastic Bagsor as Your Payment
Specification
CE, SGS
Trademark
China Coal
Origin
China
HS Code
87054000
Production Capacity
1000 Sets Per Month
Certification:
ISO9000, CE
Transmission Type:
Automatic
Emission Standard:
Standard
Displacement:
4.2
Payload:
6500kg
Fuel:
Diesel
Introduction of 4 Wheel Drive Self Loading Truck Concrete Mixer Truck
1.The vehicle size is small, suitable for limited site and widely used in new rural construction, urban construction ,tunnel ,airport ,seaport ,high-speed rail site and so on.
2. High strength steel plate, enhance vehicle load capacity. the vehicle with high stability
3.Small capacity mixing drum design, the angle is lower than same profession, effectively reduce the gravity of vehicles improve thedriving safety.
4. Rolling ring and mixing drum use 16mn overall forging normalizing manufacturer and processing.
5.Mixing blade with varying pitch design, and simplify the feeding device, ensure the speed faster and mixing performance better.
Parameter of 4 Wheel Drive Self Loading Truck Concrete Mixer Truck
Photos Of 4 Wheel Drive Self Loading Truck Concrete Mixer Truck
1.The vehicle size is small, suitable for limited site and widely used in new rural construction, urban construction ,tunnel ,airport ,seaport ,high-speed rail site and so on.
2. High strength steel plate, enhance vehicle load capacity. the vehicle with high stability
3.Small capacity mixing drum design, the angle is lower than same profession, effectively reduce the gravity of vehicles improve thedriving safety.
4. Rolling ring and mixing drum use 16mn overall forging normalizing manufacturer and processing.
5.Mixing blade with varying pitch design, and simplify the feeding device, ensure the speed faster and mixing performance better.
Parameter of 4 Wheel Drive Self Loading Truck Concrete Mixer Truck
| Attributes | Unit | Parameters | |
| Actual mixing capacity | m3 | 2.5 | |
| Mixing drum capacity | m3 | 3.5 | |
| Angle of inclination | 0 | 16 | |
| Rotational speed | r/min | 0-14 | |
| Rotational direction(Forward observation from rear) | Feed:Clockwise and discharge:Anticlockwise | ||
| Mixing drum vanes | Two spiral vanes and auxiliary blades | ||
| Productivity | 4 batches per hour | ||
| The slump of concrete | mm | 70-260 | |
| Hydraulic Transmission System | |||
| Oil Pump | CBF-32 | ||
| Motor model | BMS-100 | ||
| Reduction box/speed ratio | HJ220 | ||
| Water supply System | |||
| Water supply | Bring water agencies | ||
| Water tank volume | L | 450 | |
| Chassis and Engine Parameters | |||
| Engine Model | Perkins 1104D-44TA | ||
| Form | Direct injection four stroke water cooled turbocharged diesel engine | ||
| Air cylinder amount | 4 | ||
| Displacement | L | 4.58 | |
| Rated power | kw/r/min | 81/2300 | |
| Maximum torque | N.m/r/min | 450/1500-1700 | |
| Maximum travelling speed | km/h | 24 | |
| Minimum turning diameter | M | 8 | |
| Gradeability | % | 24 | |
| Tire | 9.00-20 | ||
| Driving form | 4 wheel drive,4 wheel steering | ||
| Vehicle equipment quality | kg | 6250 | |
| Maximum loading weight | Kg | 6500 | |
| General weight of the carload | kg | 12750 | |
| overall dimension(L/W/H) | mm | 6700x2400x3100 | |
Send Message
