*100% new condition by manufacturer direct sale*
*100% quality guaranteed*
The concrete pump truck is equipped with more efficient skirt valve and S valve pump technology, more stable reversing buffer technology, more reliable full hydraulic reversing technology.
It adopts Sinotruk HOWO ,Ben z chassis, featuring with powerful output, large torque, high efficiency, energy conservation and strong off-road performance.
Advantages and highlights:
1.Ultimately Safe Boom.
2. Lower Structure of High Rigidity.
3.Hydraulic System of Outstanding Performance.
4.Effectively reduce emissions with the reversing, vulnerability of longer life.
5.The pumping system adopts electric control reversing, reversing faster and the system impact smaller.
6.The actual pumping efficiency is more than 5% higher than the conventional hydraulic control reversing system.
» II . CONCRETE MIXER TRUCK SPECIFICATION
42M truck-mounted concrete pump has 42m vertical reach with the height limit programmed to prevent boom contact with an obstruction or overhead hazard. The 42m concrete pump provides the users reliable pumping performance along with the highly wear resistant parts including delivery pipe, discharge port, transition bushing, concrete piston, wear plate, cutting ring and delivery cylinder that improve the pumping efficiency and reduce down time.
Description
One Button Stabilization Technology
The one button stabilization technology quickly dampens any boom movement resulting from repositioning the boom. This allows precise positioning of the end hose.
Boom Anti Vibration Technology
The boom anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
Anti Overswing Technology
By adopting our new swing brake technology, the boom's overswing amplitude is reduced by 60%
Fault Self Diagnostic Technology
Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.
Smart Boom System
One Button Boom Extend/Retract
Press upward on the boom extend/retract button to extend the boom or press downward to retract the boom automatically.
Coordinated Section Operation
The boom can be rapidly and accurately repositioned by coordinating the movement the first and second sections
Safety Technology
Boom Overload Protection Technology
Relief valves are mounted on the boom cylinder counterbalance valves. These valves will release pressure in the event of excessive boom load to prevent damage to the boom.
Hopper Screen Interlock Technology
As an operator protection measure, the pump will automatically stop when the hopper screen is opened.
Hydraulic Oil Level Monitoring
The oil level in the hydraulic reservoir is continually monitored. If the level drops below a preset level, an alarm will sound and the pump will be stopped to prevent damage to the hydraulic system.
Specification
| 42m Mobile Pump Truck Technical Specification | |||
| Items | Unit | Model of Whole Truck | |
| HX5292THB-42 | |||
| Main Technical Parameters in Service | Theoretical Pumping Capacity | m3/h | 150 |
| Pumping Capacity Index | Mpa.m3/h | 586 | |
| Theoretical Pumping Pressure | Mpa | 8.5 | |
| Hopper Capacity | L | 700 | |
| Feeding Height | mm | 1370 | |
| Distributing Valve | S valve | ||
| Max. Distributing Radius | m | 33.2 | |
| Max. Distributing Height | m | 37.2 | |
| Max. Distributing Depth | m | 24.3 | |
| Height of Distributing Boom When Stretched | mm | 8450 | |
| Distance between Front Landing Legs | mm | 6507 | |
| Distance between Rear Landing Legs | mm | 6600 | |
| Distance between Front and Rear Landing Legs | mm | 7179 | |
| Diameter of Conveying Pipe | mm | 125 | |
| Length of End Hose | m | 4 | |
| Rotary Range of Distributing Boom | 365° | ||
| Number of Boom Sections | 4 | ||
| Rotary Angle of Each Boom Section | ° | 92/180/180/270 | |
| Remote-control Distance | m | 200 | |
| Main Technical Parameters in Traveling Condition | Max. Traveling Speed | km/h | 90 |
| Min. Turning Radius | mm | 8800 | |
| Brake Distance | m | 7 | |
| Approach Angle | ° | 16 | |
| Departure Angle | ° | 11 | |
| Chassis Model | HOWO | ||
| ZZ5347V4647D1(EURO IV) | |||
| Wheel Base between the First and the Second Axle | mm | 4600 | |
| Wheel Base between the Second and the Third Axle | mm | 1350 | |
| Front Tread | mm | 2022 | |
| Rear Tread | mm | 1830 | |
| Max. Engine Power | kw | 380HP (EURO IV) | |
| Max Engine Torque | n.m | 1350 (1100-1600r/min) | |
| Max. Grade Ability | % | 35 | |
| Fuel Consumption Limit | L/100km | 34 | |
| Overall Dimension (L ×W× H) | mm | 12000×2490×3850 | |
| Full-load Total Weight | kg | 29000 | |
» IV . CONCRETE PUMPTRUCK WORKSHOP
» V . CONCRETE PUMP TRUCK WORKING CONDITION
» VI . CONCRETE PUMPTRUCK TRANSPORTATION
» VII. ABOUT US
HUBEI MANTEN AUTOMOBILE CO.,LTD is an authorized special truck manufacturer which has many years in design ,product ,sales and service in special trucks like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and etc. Main info as below:
(1) More than 500 workers, large and advanced production;
(2) 25 professional engineers, can offer the best and cheapest design;
(3) Build strict QC team to guarantee the quality;
(4) 1 year or 30,000km warranty which comes first.
(5) One set of spare parts of chassis provided which will help you save money on maintenance.
(6) Provide technical support and after serive for life.
(7) Professional sales team which will help you to choose suitable truck.
» VIII.FAQ
Why choose us?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has solid technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,iv eco,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 3000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
