TH 60kw EV charger
CCS/Chademo/Gbt
54
Higher Than 2000m
on Line Support and Site Guidance
Fast EV Charging Station
CE, ISO
12 Months
TONHE
Wooden Case
700*600*1900mm
China
8504401990
Product Description
Techdata
This product is CCS, chademo, AC integrated fast charging pile, which is mainly used for charging European standard and Japanese standard electric vehicles. The product has the functions of charging protection, card charging, code scanning charging, mobile payment, network monitoring, remote upgrade and so on. This product adopts the principle of industrial design, easy to install and deploy, and has the following innovative design:
1) The standby power consumption of the device is low, and the power supply of the charging module will be cut off automatically when there is no car charging.
2) The industry-leading resonant voltage type double loop control resonant switching power supply technology and three-phase three electricity average power factor correction technology are adopted.
3) The protection grade of the whole machine is IP54. It has good dustproof and waterproof performance and can be safely operated and maintained outdoors.
4) The equipment strictly follows the principle of modular design, and the 10m / 100M Ethernet and 3G / 4G router are connected to the wired or wired functions. It has the advantages of small volume, light weight, high efficiency and high reliability.
Company Introduction
Tonhe is a high technology enterprise specialized in innovation of technology, product and management in the power electronics industry, and R & D, manufacturing ,sales, operation and service of EV charger module&rapid charger point and related products , providing customers with system solution for the energy sector.
Tonhe was established in 1998 and got listed in 2015 with stock code 300491.
Manufacturing Center
Testing Center
18m³ walk-in high and low temperature lab
Anechonic Chamber Designed and contracted to build by Germany FARNKONIA,meeting testing place requirements of CISPR22\CISPR24,IEC61000-4-3,ISO 11452-2,ISO 11452-4,GJB151A/GJB152B
Test hall:program AC power supply,DC electronic load,power quality analyzer,300KVA adjustable AC power supply and so on.
EV Charging Station Project
St. Petersburg Charging Station
Moscow Bus Station
Minsk Railway Station
Used in ship enviroment in Tailand
| Caniet Model No. | G26 |
| Power(KW) | 60KW |
| Demension(W*D*H)mm | 700*600*1900 mm |
| Charging Module Qty(Max)pcs | charging module TH30F10025C7 *2pcs |
| Connectors | 3 connectors: one CHAdeMO +one CC2 combo + one AC type 2 |
| Charging gun length | 5M |
| Input Voltage | 380VAC±25% |
| Output Voltage | 150-1000 VDC |
| Constant Power Output Range | (250-1000V)60KW |
| Output Current (max.) | 240 A |
| Charging distribution | when two cars charging at the same time, 30kW for each car |
| Frequency | 50Hz±10% |
| Voltage Stablization Accuracy | <±0.5% |
| Current Stablization Accuracy | <±1% |
| Efficiency(peak value) | ≥96% |
| Power Factor | 0.99 |
| Insulation Resistance | ≥10M |
| Insulation Strength | Output to ground, input to ground, input to output 3.5KVDC applied, 1min without arc and flashover. |
| Relative Humidity | 95%(no condensation) |
| Altitude | ≤2000M |
| Operation Temperature | -20ºC-+70ºC |
| Protection Level | IP54 |
| Dynamic response | The recovery time is ≤ 200μs and the overshoot is ≤± 5% in 20% load jump channel at 80% load |
| Start-up Delay | 3-8 s |
| Communication Protocal | OCPP 1.6 JASON |
This product is CCS, chademo, AC integrated fast charging pile, which is mainly used for charging European standard and Japanese standard electric vehicles. The product has the functions of charging protection, card charging, code scanning charging, mobile payment, network monitoring, remote upgrade and so on. This product adopts the principle of industrial design, easy to install and deploy, and has the following innovative design:
1) The standby power consumption of the device is low, and the power supply of the charging module will be cut off automatically when there is no car charging.
2) The industry-leading resonant voltage type double loop control resonant switching power supply technology and three-phase three electricity average power factor correction technology are adopted.
3) The protection grade of the whole machine is IP54. It has good dustproof and waterproof performance and can be safely operated and maintained outdoors.
4) The equipment strictly follows the principle of modular design, and the 10m / 100M Ethernet and 3G / 4G router are connected to the wired or wired functions. It has the advantages of small volume, light weight, high efficiency and high reliability.
Company Introduction
Tonhe is a high technology enterprise specialized in innovation of technology, product and management in the power electronics industry, and R & D, manufacturing ,sales, operation and service of EV charger module&rapid charger point and related products , providing customers with system solution for the energy sector.
Tonhe was established in 1998 and got listed in 2015 with stock code 300491.
Manufacturing Center
Testing Center
18m³ walk-in high and low temperature lab
Anechonic Chamber Designed and contracted to build by Germany FARNKONIA,meeting testing place requirements of CISPR22\CISPR24,IEC61000-4-3,ISO 11452-2,ISO 11452-4,GJB151A/GJB152B
Test hall:program AC power supply,DC electronic load,power quality analyzer,300KVA adjustable AC power supply and so on.
EV Charging Station Project
St. Petersburg Charging Station
Moscow Bus Station
Minsk Railway Station
Used in ship enviroment in Tailand
