BZIC-10KW
Active Inverter
CE
>1000W
off-Grid Inverter
Single
Full-Bridge Type
Sine Wave Inverter
DC/AC Inverters
Bangzhao and OEM
Wooden Box and Honeycomb Box
CE
Zhejiang
8504403090
Product Description
Off-Grid Pure Sine Wave Inverter
Our BZP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
1. Excellent EMC design
2. Industrial-grade chip
3. Full enclosed duct design and high speed fan for cooling
4. Users can parallel connect lots of our controllers in a system
5. Infineon IGBT module or IR MOSFET ensures stable performance
6. New SOC method indicates the power generation information of daily, monthly and total
7. 3''LCD+LED display+touching keys as HMI makes the operation more easy
8. PWM Charging technology: fast charging, equalize charging and float charging
9. Advanced battery activation technology increases battery lifetime 30% at least and improves the system performance
10. Temperature compensation function compensates the voltage based on different
temperature
11. RTC function indicates the real time and temperature
12. The second protection will protect battery from destroying when the power switch (IGBT) is down (optional function)
13. DC output function (Optional function)
14. Standard Modbus protocol for RS485 or GPRS communication.
Technical Parameter
Wall-mounted for 24V~600V / 30A~150A
Remark: "Equalize voltage", "Equalize recovery voltage", "Equalize charging time", "Float voltage", "High voltage disconnect", "High voltage reconnect" are default setting, users can adjust them according to different requirement.
Our company can adjust parameter configuration according to user's requirement.
Company Information
Packaging & Shpping
Why choose our product
Contact information
Our BZP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
- Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It's service life can up to 15 years or more.
- Intelligentized, modularized, simple structure design with powerful function.
- Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
- The output frequency can be setting via LCD panel, it's very convenient for customer.
- The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
- The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
- Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
- Low Frequency Transformer, which ensures that inverter has high efficiency.
- High conversion efficiency, Max. Efficiency≥94%,if 48VDC input,the efficiency can more than 85%.
- Adopts black pure aluminum radiator, which confirms the best radiating performance.
- Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
- Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V.
- Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power
- Optional function:RS485 remote monitoring,AC bypass input,built in solar charge controller or AC to DC battery charger.
Model BZP-8KW BZP-10KW Isolation mode Low Frequency Transformer DC Input Rated voltage (Vdc) 120V 192V 192V 240V Rated current(A) 67A 42A 52A 42A AC Output Rated output power 8KW 10KW Output waveform Pure Sine Wave Rated Voltage 220V±3% 380VAC±3% 220V±3% 380VAC±3% Phases Single phase 3 phase 4 wire Single phase 3 phase 4 wire Rated current(A) 36A 12A (phase current) 45.5A 15A (phase current) Frequency 50Hz or 60Hz Rated output voltage range (V) 110/120/220/230/240/380/400/415VAC optional Power Factor(PF) 1 Overload Ability 150%, 5 seconds Efficiency >93% Waveform distortion rate (THD) <3%(Linear load) Dynamic Response (0 to 100% load) 5%,≤50ms Display LCD Running mode Working continuously Electrical insulation properties 2000Vac, 1 Minute Communication interface (optional) RS485 Protection Function Protection Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. Cooling method Fan-cooled Short-circuit protection No automatic recovery, need to restart the machine Working environment Noise ( 1 meter) ≤50dB Degree of protection IP20(indoor) Working Altitude(m) ≤2000 Working temperature -25~+50ºC relative humidity 0~90%,non-condensing Mechanical dimension Depth* Width * Height 540x540x760mm Weight (Kg) 120Kg 130Kg
1. Excellent EMC design
2. Industrial-grade chip
3. Full enclosed duct design and high speed fan for cooling
4. Users can parallel connect lots of our controllers in a system
5. Infineon IGBT module or IR MOSFET ensures stable performance
6. New SOC method indicates the power generation information of daily, monthly and total
7. 3''LCD+LED display+touching keys as HMI makes the operation more easy
8. PWM Charging technology: fast charging, equalize charging and float charging
9. Advanced battery activation technology increases battery lifetime 30% at least and improves the system performance
10. Temperature compensation function compensates the voltage based on different
temperature
11. RTC function indicates the real time and temperature
12. The second protection will protect battery from destroying when the power switch (IGBT) is down (optional function)
13. DC output function (Optional function)
14. Standard Modbus protocol for RS485 or GPRS communication.
Technical Parameter
Wall-mounted for 24V~600V / 30A~150A
| Battery group system voltage | 24V | 48V | 96V | 192V | 240V | 360V | 480V | 540V | 600V |
| PV Max. input open circuit voltage | 100V | 100V | 200V | 350V | 450V | 700V | 950V | 1000V | 1000V |
| Rated charging current | 30A 50A 60A 80A 100A 120A 150A | ||||||||
| Number of PV input string | 1 group (Optional 2 group) | ||||||||
| Equalize charging voltage | 28.8V | 57.6V | 115.2V | 230.4V | 288V | 432V | 576V | 648V | 720V |
| Equalize charging recovery voltage | 26.4V | 52.8V | 105.6V | 211.2V | 264V | 396V | 528V | 594V | 660V |
| Equalize charging time | 120 minutes | ||||||||
| Float charging voltage | 27.6V | 55.2V | 110.4V | 220.8V | 276V | 414V | 552V | 621V | 690V |
| Over voltage disconnect | 32V | 64V | 128V | 256V | 320V | 480V | 640V | 720V | 800V |
| Over voltage reconnect | 30V | 60V | 120V | 240V | 300V | 450V | 600V | 675V | 750V |
| No-load loss | <0.5W | ||||||||
| Environment temperature | -25ºC ~ 55ºC | ||||||||
| Terminal type | TC series barrier terminal | ||||||||
| Elevation | ≤4000M, it should reduce power if the elevation high than 4000M | ||||||||
| Humidity | 0 ~ 98%, Non-condensing | ||||||||
| Protection level | IP32 | ||||||||
| Display | 3'' LCD(White backlight) | ||||||||
| Display language | English | ||||||||
| Indicator light | Error indicator/Charging indicator | ||||||||
| Noise | < 30dBA | ||||||||
| Cooling method | Fan + heat sink | ||||||||
| Dimension | 420*345*157mm | ||||||||
| Net Weight | 10KG | ||||||||
| Package size | 540x470x280mm | ||||||||
| Gross weight | 12KG | ||||||||
| Package information | Hard box with pearl sponge | ||||||||
| Optional function | DC output, RS485, GPRS | ||||||||
Our company can adjust parameter configuration according to user's requirement.
Company Information
Packaging & Shpping
Why choose our product
Contact information
