marine rubber fenders
Rubber
Yokohama Type
Protection
BV, ISO9001, CCS
Evergreen Maritime
Plywooden Packing
D2000MM X L3500MM, ISO17357: 2002
China
40169500
Product Description
REQUIREMENT OF INFLATABLE SHIP MARINE RUBBER FENDERS FOR PIER,WHARF, OIL PLATFORMS
Ship Fender shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
The out rubber are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender
The inner rubber layer seals the pressurized air inside the fender
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
FENDER TYPE OF INFLATABLE SHIP MARINE RUBBER FENDERS FOR PIER,WHARF, OIL PLATFORMS
A. Ship Fender (with chain and tir net)
B. Floating Ship Fender
PRESSURE REQUIREMENT OF INFLATABLE SHIP MARINE RUBBER FENDERS FOR PIER,WHARF, OIL PLATFORMS
Evergreen-Maritime manufactures Ship Fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357: 2002.
Ship Fender shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
The out rubber are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender
The inner rubber layer seals the pressurized air inside the fender
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
FENDER TYPE OF INFLATABLE SHIP MARINE RUBBER FENDERS FOR PIER,WHARF, OIL PLATFORMS
A. Ship Fender (with chain and tir net)
B. Floating Ship Fender
PRESSURE REQUIREMENT OF INFLATABLE SHIP MARINE RUBBER FENDERS FOR PIER,WHARF, OIL PLATFORMS
Evergreen-Maritime manufactures Ship Fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357: 2002.
