Introduction of FM3.5-2 Self Loading Mobile Concrete Mixer
FM3.5-2 Self Loading Mobile Concrete Mixer With CE Certification feature combines self-loading
, weighing, mixing and discharging. It can maximize and improve the job efficiency and reduce the
production cost and time.
High Efficiency
Capacity:14 cubic meters(18.31 cubic yards)/hour;
110 cubic meters (143.87 cubic yards)/day;
33000 cubic meters(43,162.44 cubic yards)/year
Labor-saving
4 wheel drive, 4 wheels steering
Accurate Electric Weighing System
The mixing unit is slewing hydraulically through 270° for high discharge over 1.8m to the
four sides of the vehicle
Loading, Weighing, Pumping, Mixing, Delivering, Discharging
Name | Item | Specification | |
Vehicle | Net | 7500kg | |
Gross | 15000kg | ||
Transmission | Hydraulic | ||
4*4 | |||
Brake | Hydraulic Brake | ||
Front and Rear Independent System | |||
Chassis | Off Road, CARRARO axle | ||
Distance of Front/Rear Wheelbase | 1905mm
| ||
Wheelbase | 2155mm | ||
Loader | Capacity | 0.6m³ | |
Control | Hydraulic | ||
Tile Angle | 30% | ||
Speed | High | 0-20km/h | |
Low | 0-9km/h | ||
Min.Turning Radius | 6.5m/R | ||
Tire | 16/70-20 | ||
Dimensions(L*W*H) | 7011*2441*3310(MM) | ||
Diesel Engine | Type | 4BTA3.9-C110 | |
Rated Power/rpm | 82KW/2200rpm | ||
Max.Torque/rpm | 460N.m/1400rpm | ||
Cylinder | 4-cylinder/3.9L | ||
Bores | 102mm | ||
Cooling Type | Water cooling | ||
Fuel Consumption | 207g/kw.h | ||
Starter | Electric | ||
Emission Standard | China II | ||
Mixing Drum | Drum Capacity | 3.5m³,14m³/hr. | |
Bank Angle | 16° | ||
Rotation Speed | 10-16r/min | ||
Angle of Drum Rotation | no less than 270° | ||
Chute | Swing Angle | no less than 60° | |
Angle Control | Hydraulic | ||
Size | Long:106cm | ||
Short:40cm | |||
1.. Which countries do we export to?
Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: South Africa, Ethiopia, Libya, Ghana,Algeria,etc.
2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare parts,like engines,bridge,transmissions,and many parts designed and produced by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians,
ready to provide support services to users and dealers. Most problems can be solved
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shall
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted.
4. How long is the validity of our quotation?
As a reliable supplier, basically our price remains stable through one year, we only adjust
our price based on two situations:
1)The rate of USD
2)TheThe price of material
Other questions, please contact me directly!!
