TW0018-Wireless rotary sensor is a sensor used to measure the related physical quantities which are related to rotary. Combined with the supporting accessories can study on a variety of physical experiments.
Specification
| Measuring range | 0~360° |
| Resolution | 0.125° |
| Maximum speed | 30r/s |
Note
1. The sensor, especially the accessories, must be positioned accurately, connected solidly and moved flexibly.
2. When using the 3-step pulley, should pay attention to avoid slippage.
3. When using the Bluetooth, turn on its switch firstly, after pairing with the Bluetooth device of computer, can carry out the experiment.
4. The Bluetooth in experiment is 2.0.
5. The functions of this sensor's switch are as follows: power off, power on and Bluetooth.
Typical experiments
- Measure the acceleration of gravity by physical pendulum
- Verify the law of conservation of mechanical energy
- Measure the distance the rotary sensor moved
- Verify the Atwood machine
- Measure the relative rotational velocity
- Measurement on rotation collision
- Measure the angular velocity
Usage
1.Before experiment, connect different accessories according to the experimental requirement.
2.Ensure the accessories, sensor and iron stand are connected firmly. There should be no shaking occurs in the experiment.
3.Connect it to computer using USB cable or Bluetooth. Switch on the sensor and select 'USB sensor' or 'Bluetooth sensor' in the software.
4.Some experiments need to be zero by software before experiment.
CE certificate
