High Pressure Hydraulic Polyurea Coating Spray Equipment Polyurethane Foam Injection Spray Machine

 

High Pressure Hydraulic Polyurea Coating Spray Equipment Polyurethane Foam Injection Spray Machine


The high-pressure airless sprayer uses a high-pressure plunger pump to pressurize the paint to 3000PSI (210kg / cm). The high-pressure paint is delivered to the spray gun through the high-pressure hose, and the pressure is released through the nozzle to form an atomization, which forms a dense coating. Since compressed air is not required for atomizing paint, it is called airless spraying.

Advantages:

1. extremely high coating efficiency. The spraying efficiency is as high as 500-1200 square meters per hour, which is more than 10 times that of traditional roller construction
2. excellent surface quality. The spray coating is smooth, smooth, dense, free of brush marks, rolling marks, and particles.
3. extend the service life of the coating. High-pressure airless spray can make the paint particles penetrate into the gaps of the wall, make the paint film also form a mechanical bite on the wall, enhance the adhesion of the paint, and extend the service life.
4. easily overcome corners, voids and uneven areas that are difficult to brush
5. save paint. The thickness of the brush coating is very uneven, generally 30-250 microns, the coating utilization rate is low, and the airless spray is easy to obtain a coating with a thickness of 30 microns, which saves 20-30% of the coating.

Data Sheet:
 

Product Usage
FMJN-H5600(T) type Polyurea Hydraulic spraying system has a wide range of application. Equipment suitable for a variety of construction environment, can spray a variety of double-part materials: Polyurea elastomers, polyurethane elastomers, polyurethane foaming materials and polyurea waterproof, anti-corrosion materials are widely used in Subgrade waterproofing, Pipeline anticorrosion, auxiliary cofferdam Engineering, water tank anticorrosion, storage tanks, tank anticorrosion, pipe coating, cement layer protection, wastewater treatment, Roof waterproofing, Basement, industrial maintenance, wear-resistant lining, cold storage, exterior walls and other insulation, insulation, anti-corrosion, waterproof, wear-resistant areas.
Technical parameters		Product advantages
Power	three-phase four-wire 380V 50Hz	1. Equipped with air cooling system to reduced oil temperature, hence offer protection for the motor and pump and save oil. 2. Hydraulic station works with accumulator, making the system smaller and lighter, guaranteeing the stable pressure for the system. 3. Flat-mounted booster pump makes A and B material pumps simultaneously, making sure pressure stability. 4. The main frame is made from seamless steel tube so it is more corrosion resistant and can bear with higher pressure. 5. Leakage protector from main power safeguarding the operator effectively. 6. Equipped with emergency switch system and over pressure alarm, help operator deal with emergencies rapidly; 8. Reliable & powerful 380V heating system enables rapid warming of raw materials to the best state, making sure it perform well in cold condition; 9. Humanized design with equipment operation panel, super easy to get the hang of it; 10. Feeding pump adopts big change ratio method, it can easily feed raw materials high viscosity even in winter. 11.The latest spraying gun has great features like small volume, light weight, low failure rate,    etc.
Heating power	25KW
Driven mode	hydraulic
Hydraulic pressure	6-18Mpa
Air pressure	0.5~0.8 MPa ≥0.5m3/minute
Material output	2~12kg/minute
Max pressure	36Mpa
AB material ratio	1:1