GVS-02-002
Magnetic Displacement Sensor
Digital Type
Angular Displacement
Integration
Stainless Steel
IP65
CE
Customized
2mm (0.08inch) Max
0-20kHz
2 Independent Channels
Yuanben
Carton
Shanghai
Product Description
GVS-02-002 Hall-Effect Two Channels Speed Sensor
Description
GVS-02-002 is developed on the basis of GVS-02-001 dual channel Hall speed sensor. It has the characteristics of small volume, excellent performance and high measurement accuracy. It is used to detect the speed, linear speed and acceleration of wheel axle, rack, concave convex keyway, etc. The phase signal processing circuit is added to the sensor. There is a group of output signals to identify the positive and negative rotation. When the rotation direction is consistent with the arrow direction of the probe, the first channel is ahead of time, and the second channel is lagging behind. The turn signal output is high level, and the direction indicator light is off; otherwise, it is low level, and the direction indicator light is on; it has no contact with the gear to be tested, no wear and tear, and convenient installation. It has the function of polarity and short circuit protection, wide speed measurement range, zero speed and high speed detection, wide temperature range and strong seismic resistance.
Typical Applications
Automotive and Heavy Duty Vehicles:
1. Frequency response range: 0-20khz
2. Gear parameters: modulus ≥ 2, number of teeth ≤ 60, material of magnetic low carbon steel
3. Installation clearance: L0= 0 - 2mm, typical value is L0 = 1.5mm
4 speed signal output:
a: Number of channels: independent dual channel
b: Signal type: rectangular square wave
c: Signal amplitude: Voh (high level) ≥ vcc-1v, Vol (low level) ≤ 0.6V
d: Output current: 25mA
e: Output short circuit current: 50-150 MA (VCC = 12V)
5.Turn signal output:
a: Signal type: logic level (COMS)
b: Signal amplitude: Voh (high level) ≥ vcc-1v, Vol (low level) ≤ 0.6V
c: Output current: source current 7.5 Ma, suction current - 7.5 MA (VCC = 12 V)
d: Output short circuit current: 25 -- 60 MA (VCC = 12V)
6. Applicable temperature range: - 10 ~ + 85 ºC
7. Protection grade: IP65
8. Power supply voltage: 12VDC ± 30% (5-18) VDC is recommended
9. Shell material: nickel plated brass
Photos
Description
GVS-02-002 is developed on the basis of GVS-02-001 dual channel Hall speed sensor. It has the characteristics of small volume, excellent performance and high measurement accuracy. It is used to detect the speed, linear speed and acceleration of wheel axle, rack, concave convex keyway, etc. The phase signal processing circuit is added to the sensor. There is a group of output signals to identify the positive and negative rotation. When the rotation direction is consistent with the arrow direction of the probe, the first channel is ahead of time, and the second channel is lagging behind. The turn signal output is high level, and the direction indicator light is off; otherwise, it is low level, and the direction indicator light is on; it has no contact with the gear to be tested, no wear and tear, and convenient installation. It has the function of polarity and short circuit protection, wide speed measurement range, zero speed and high speed detection, wide temperature range and strong seismic resistance.
Typical Applications
Automotive and Heavy Duty Vehicles:
- Camshaft and crankshaft speed/position
- Transmission speed
- Tachometers
- Anti-skid/traction control, ABS system
- Sprocket speed
- Chain link conveyor speed and distance
- Stop motion detector
- High speed low cost proximity
- Tachometers, Counters
- Gear tooth Sensor
1. Frequency response range: 0-20khz
2. Gear parameters: modulus ≥ 2, number of teeth ≤ 60, material of magnetic low carbon steel
3. Installation clearance: L0= 0 - 2mm, typical value is L0 = 1.5mm
4 speed signal output:
a: Number of channels: independent dual channel
b: Signal type: rectangular square wave
c: Signal amplitude: Voh (high level) ≥ vcc-1v, Vol (low level) ≤ 0.6V
d: Output current: 25mA
e: Output short circuit current: 50-150 MA (VCC = 12V)
5.Turn signal output:
a: Signal type: logic level (COMS)
b: Signal amplitude: Voh (high level) ≥ vcc-1v, Vol (low level) ≤ 0.6V
c: Output current: source current 7.5 Ma, suction current - 7.5 MA (VCC = 12 V)
d: Output short circuit current: 25 -- 60 MA (VCC = 12V)
6. Applicable temperature range: - 10 ~ + 85 ºC
7. Protection grade: IP65
8. Power supply voltage: 12VDC ± 30% (5-18) VDC is recommended
9. Shell material: nickel plated brass
Photos
