Top Manufacturer Designs New Aluminum Alloy Oil Pump widely used in tank trucks
Product details
| product name | aluminum alloy oil pump |
| material | aluminum alloy |
| feature | Wear-resistant, long service life |
| size | costomer need |
| delivery | 15 days |
| payment method | T/ T or payple |
| Product Keywords | New Aluminum Alloy Oil Pump,New disign Aluminum Alloy Oil Pump |
The combination of the safety valve and the oil pump can optimize the design of the pipeline system of the oil truck. There is a pressure reducing device in the pump, so there is no need to install a safety valve in the pipeline. match. The pump body and side cover are made of special aluminum alloy material to reduce weight. The pump shaft adopts advanced electroplating process, which improves the surface roughness and hardness of the oil seal, and the pump shaft adopts anti-rust treatment.Large flow rate and low working noise, the unique arc special aluminum alloy gear can be idling without heating without damaging the gear or pump body (if the liquid is still idling and the situation is unknown, the general traditional nylon gear oil pump will soon be due to The gear gets stuck due to heat, etc.)When repairing and replacing, please pay attention to the installation size of the pump, pay attention to the size of the inlet and outlet flanges, the diagonal center distance of the flange installation holes of the pump is 100mm, and the parallel hole distance is 70mm. And flanges, handed over to the construction department designated by the state or with relevant qualifications and experience for construction safety, eliminating hidden dangers!It is suitable for conveying liquids that do not contain solid particles and are non-corrosive. The viscosity of the medium is 5 centistokes-53 centistokes (gasoline-50# mechanical lubricating oil). The applicable temperature is -30 degrees Celsius -80 degrees Celsius. Inside the oil pump roomNote during installation: When installing the oil truck, it should be installed as far as possible on the pump frame that is fixed to the longitudinal coupling, so as to avoid interference between the pump body and the drive shaft of the car. The height of the pump is determined by the output shaft of the power take-off, and the drive shaft is connected It should be kept coaxial as far as possible, and the inclination angle should not be greater than 7°.
Hubei Huate Special Equipment Co., Ltd located in Suizhou city - capital Of China's special automobile, is a company that integrates R&D, production and sales of special autoparts.
The company is advanced in scientific development mode with rich production practice, strong technical force, excellent equipment, excellent product performance, strict quality control and through after-sales service system. HUATE introduces and absorbs advanced technology at home and abroad.
The products are widely used in special fields such as petroleum, chemical, ship-building automated production lines and sold to lots of famous automobile manufacturing enterprises all over China.
Q: Are you trading company or manufacturer?
A: We are factory.
Q:Can I have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.
Q: How long have you worked in this field?
A: Over 15 years.
Q:What's the delivery time?
A: Standard products will be arranged to ship in 7-10 days after full payment received.
Q: Can your factory produce products according to our drawings or samples?
A: Yes, of course we can.
