WB-CLK200
Optical Type
Contact
Switching Type
Integration
Corrosion Resistant
Stainless Steel
IP68
CCC
Non-Customized
DC12V+/-0.5V (by Safety Barrier)
-20~+60°
30%~90%
<35mA
<2s
Sound-Light Alarm
<3mm
[Exia Ga] II B
up to 12
WINDBELL
Cartons, Wooden Case
28*21*10, 3kg
Zhengzhou
902610000
Product Description
Gas Station Fuel Dispenser Sump Diesel, Water Leak Monitor Controller
The leak detection system is specifically designed to monitor the leakage of fuel and water in the interstitial of double-wall tanks and double-wall pipelines, tank sump and pump sump, distinguish of the existence of water and oil, and remind by audible-visible alarm.
CLS200 series leak sensor adopt optical type principle, can detect and identify water and fuel leakage of tank interstice, pipe interstice, tank sump and dispenser sump.
- Compact structure and artistic appearance.
- Easy to install and maintain.
- Explosion-proof design, safe and reliable.
- Can connect with 12 sensors.
- Support to connect with Float switch leak sensor.
- Can connect with switch volume leak sensor or RS485 type leak sensor.
- Can identify fuel and water, and then give corresponding alarm.
- Communication failure alarm function.
- Leak sensor fault alarm function.
- LED alarm prompt function.
- With mute button, can eliminate sound alarm when alarm occurs but do not affect light alarm.
- Can communicate with host computer, and display leak detection information on PC software.
- Support to integrate with Tank Gauging system.
| Power supply of controller | AC220V, +10%, -15% |
| Working temperature of controller | -20ºC~+60ºC |
| Working temperature of sensor | -40ºC~+60ºC |
| Relative humidity | 30%~90% |
| Operating current | <35mA |
| Response time | <2S |
| Alarm type | LED, audible-visible |
| Alarm mode | Sound-light alarm |
| Explosion-proof mark of controller | [Exia Ga] IIB |
| Ex-proof mark of sensor | Ex ia IIC T4 Ga |
| Controller monitor sensors | Up to 12 |
| Intrinsic safety parameter | Power port: Ui=12.6VDC, Ii=291mA, Pi=0.92W, Ci=1.6uF, Li=0mH; Signal port: Ui=7.14VDC, Ii=147mA, Pi=0.26W, Ci=0.11uF, Li=0mH. |
