These repairs are center-over-injury designed and reinforced to restore the strength and flexibility to radial tires. For best results, use with HOPSON Chemical Vulcanizing Fluid(TC-101,103) or Heavy Duty Blue Cement(TC-101B,103B)
HOPSON offers a variety of radial-ply repair units to meet the diverse demands of today's passenger, truck, and OTR tire applications. HOPSON radial repair patches are thick, rubber-reinforced patches which allow placement on the tyre in any direction. A special compounding and design allow the repair unit to flex and resist heat, assuring a permanent repair.
Feature
| 1. Each reinforcing ply is individually end-wrapped to defect tire flexing stresses in a unique manner. |
| 2. Tie-gum construction eliminates the potential for the delamination common in competitive products. |
3. Designed to vulcanize chemically or in low-temperature systems |
4. Gray vulcanizing gum, blue poly backing |
Parameters
| Part No. | Size(mm) | Description | Box Qty | Case Qty |
| RP-T451 | 45×75 | 1 Ply | 20 | 24 |
| RP-T601 | 60×110 | 1 Ply | 10 | 24 |
| RP-T651 | 65×80 | 1 Ply | 10 | 24 |
| RP-T701 | 70×120 | 1 Ply | 10 | 24 |
| RP-T751 | 75×125 | 2 Ply | 10 | 24 |
| RP-T752 | 75×145 | 2 Ply | 10 | 24 |
| RP-T753 | 75×165 | 2 Ply | 10 | 24 |
| RP-T754 | 75×220 | 2 Ply | 10 | 24 |
| RP-T755 | 75×250 | 2 Ply | 10 | 24 |
| RP-T1001 | 100×125 | 3 Ply | 10 | 12 |
| RP-T1002 | 100×200 | 4 Ply | 10 | 12 |
| RP-T1250 | 125×150 | 4 Ply | 10 | 12 |
| RP-T1251 | 125×170 | 4 Ply | 10 | 12 |
| RP-T1252 | 125×250 | 5 Ply | 10 | 12 |
| RP-T1253 | 125×330 | 5 Ply | 10 | 12 |
| RP-T1801 | 180×230 | 5 Ply | 10 | 8 |
| RP-T1802 | 180×440 | 5 Ply | 5 | 4 |
| RP-T2005 | 200 ×350 | 5 Ply | 5 | 4 |
Using Methods
| Inspect tire for repairability using tire manufacturer of HOPSON LAB guidelines. If repairable, mark the injury with a crayon and carefully remove injuring object. |
| Probe injury to determine exact size and direction, removing all debris. |
| Select the appropriate repair patch for injury and the type of tire. Apply pre buff cleaner to repair the area and use a rubber scraper to remove dirt and mold lubricants. Using a carbide cutter, drill the injury channel 3 times from inside then 3 times from outside, making sure all damaged and rusted cables have been removed and only good rubber remains. |
| Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire inner liner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to the buffed area, working into rubber, and ALLOW TO DRY THOROUGHLY. |
| Remove the backing and center repair patch over the injury and thoroughly stitch down from the center out to remove trapped air. |
| Finish repair by applying Inner Liner Sealer around the edge of the repair patch and to the overbuff area. |
Don't miss the opportunity to check out our full range of tire repair products.
HOPSON TYRE REPAIR will always surprise you!
Ningbo Hopson Chemical Industry Limited is a specialized glue adhesives manufactory.
We have passed American ASTM Standard, European EN71 Standard, SGS Certificate, and Quality Management System ISO9001:2000.
We are mainly producing cyanoacrylate adhesives, nail glues, eyelash glues, epoxy resin glues, tire repair cements, and other adhesives. We have more than ten years of experience in the research and development of high-property adhesives.
Our products are focused on environmental protection and high quality. We are able to provide products that meet your strict requirements.
Exhibition
NINGBO HOPSON CHEMICAL INDUSTRY CO., LTD. attends exhibitions each year in the US, Germany, Dubai, Arab, India, Shanghai, etc.
Many regular and new customers visited us, and take interested in our products. You can always find something new and different at
our booth.
Our professional sales and technical team will be there offering our best service for you.
FAQ
Q: Are you a trading company or manufacturer?
A: We are a manufacturer and also a trading company, so we can provide both good prices and excellent service.
Q: Can I use our own LOGO?
A: Yes, if the customer wants a large quantity, we can use the customer's design.
Q: Do you provide samples? Is it free or extra?
A: Yes, the sample is free if it is in stock, but the customer will pay for the freight.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock, or the delivery time is 20-30 days.
Q: MOQ?
A: Different products are different, we welcome the negotiation.
Q: What about your customer service after sales?
A: Generally, we have 2 years quality guarantee, except for some special products.
