2Ton 5Ton Small Diesel Forklift Truck CPCD50 CPCD20
Environmental Friendly
- High-efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device is used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving, increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure safety.
- Parking brake with a safety protection device, when the parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material from falling down in case of hose broken.
- High-pressure hose is designed far away from the driver.
- Safety wire harness, using a waterproof plug.
| peciality parameter | Model | Unit | CPCD20 | CPCD25 | CPCD30 | CPCD35 | CPCD40 | ||||
| Power type | | Diesel | |||||||||
| Rated capacity | kg | 2000 | 2500 | 3000 | 4000 | ||||||
| Load center | mm | 500 | |||||||||
| Lift height | mm | 3000 | 3300 | 3000 | |||||||
| Travel speed (without load) | km/h | 18/19 | 23 | 20/25 | 18/19 | 19/20 | |||||
| Power, transmission and others | Engine | Rated power | kw | 40/2650 | 42/2650 | 45/2500 | 42/2650 | ||||
| Max. rotation | Nm/ rpm | 162/1800 | 174/1800 | 193/1800 | 174/1800 | ||||||
| Gearbox | Transmission type | | Hydraulic | ||||||||
| Gears,speed (front/rear) | | / | |||||||||
| Tire | type | | Pneumatic tyre | ||||||||
| Others | Dead weight | kg | 3540 | 4300 | 4600 | 4580 | 5030 | ||||
| Fork | Thickness ×Width× Length | mm | 40×125×1070 | 45×125× 1070 | 50×140 ×1070 | ||||||
| Overall dimensions | Overall length (without forks) | mm | 2480 | 2910 | 2930 | 2830 | 2970 | ||||
| Overall width | mm | 1150 | 1480 | 1800 | 1225 | 1310 | |||||
| overall height | Lower height (mast) | mm | 2000 | 2310 | 2342 | 2070 | 2170 | ||||
| Over head guard | mm | 2120 | 2515 | 2452 | 2160 | 2170 | |||||
| Min. turning radius | mm | 2170 | 2940 | 3050 | 2520 | 2710 | |||||
