0-150 PSI Pressure Sensor Oil Fuel Air Water Pressure Transducer Stainless Steel Pressure Sender Gauge DC 5V 1/8" NPT Thread
Features:
- It's an advance pressure transducer than traditional mechanical pressure transducer.
- ±2%FS small output error, including nonlinear, hysteresis error and repeatability, full temperature range.
- Light weight and small size, convenient to install and operate.
- It has complete surge voltage protection function.
- Works for oil, fuel, diesel, gas, water, air pressure, can be used in oil tank, gas tank, diesel tank etc.
Specifications:
Material: Stainless steel
Voltage: DC 5V
Pressure: 150 psi
Thread Type: 1/8" NPT
150 psi
Input: 0-150 psi
Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V
Accuracy: +/-0.5%FS
Thread: 1/8" NPT
Wiring: Red for +5V; Black for ground; Green for signal output
Overload Capacity: 2-4 times of rated pressure
Working Temperature: -40ºC~+120ºC
Compensation Temperature: 0ºC~+80ºC
Protection Class: IP67
Pressure Medium: Oil, gas and water which is compatible with 316L stainless steel
Load Resistance: ≤(supply power-6.5V/0.02A)Ω
Long-term Stability: Less than 0.1%FS/year
Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC
Temperature Effect on Sensitivity: Typical: 0.02%FS/ºC; Maximum: 0.05%FS/ºC
Shock Resistance: 1000g
Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time: ≤1ms
Insulation Resistance: >100mΩ 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN50051-1
Package Includes:
1 x Pressure Transducer (With cable)
BRAND NEW 100 PSI PRESSURE SENDER WITH CONNECTOR
- 100% brand new with high quality metal case (not plastic)
- Works for oil,fuel,diesel,gas,water,air pressure.
- Can be used with oil, water, fuel, air, etc.
- Easy to install with included connector (wiring instructions below)
- Input 0-100 psi
- Output: 0.5V - 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
- Accuracy: within 2% of reading (full scale).
- Thread: 1/8"-27 NPT.
- Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
- Wiring: Red for +5V. Black for ground. Green for signal output.
- Weight: 55 g
- Overload Capacity: 2-4 times;
- Working Temperature: -40-+120ºC;
- Compensation Temperature: -20-+80ºC;
- Protection Class: IP67;
- Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;
- Load Resistance: ≤ (supply power-6.5V/0.02A)Ω;
- Long-term stability: Less than 0.1%FS/year;
- Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;
- Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;
- Shock Resistance: 1000g;
- Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);
- Response Time: ≤1ms;
- Insulation Resistance: >100mΩ 500VDC;
- Explosion-proof Class: ExiaTTCT6;
- Electromagnetism Compatibility: EN50051-1.
