UHC, UHZ
Floating Ball
Contact
Analog Type
Normal Wirewound
Corrosion Resistant
Stainless Steel
IP65
ISO
Customized
Level Transmitter, Level Switch
Explosion-Proof or Ordinary Type on Choice
20mm, 10mm, 5mm, 1mm on Choice
Magnetostriction, Float Level Transmitter
Is Selectable on Transmitter When Order
4~20mA, Hart, RS485
SS304, SS316, PTFE, PP, PVC, Titanium etc.
Top Mounted, Side Mounted
450ºC (Max.) for Ss, 80ºC (M
Graduated in Cm, Aluminium or SS304
Flange, Thread, Clamp on
GB, DIN, JIS, ANSI etc
U-ideal
Wooden Case or Carton
0~15m
Tianjin, China
90261000
Product Description
This is a professional level gauge manufacture
We can make many kinds of level gauge,we can design and make accoding your working condition and special request.
From low pressure to high pressure,from low temperature to high temperature,and also special material,
The magnetic level gauge consists of Red/white or Yellow/Black magnetic rollers equipped with small magnets which are rotated one after another at an angle of 180º by the magnetic field of the permanent magnet put inside the float. The rollers change from white to red on rising level and red to white on falling level.
| UHC- | C | Side mounted; | |||||||||
| D | Top mounted | ||||||||||
| O | Other | ||||||||||
| Signal | Y | Standard transmitter 4~20mA current signal (Resolution: 20mm/10mm/5mm); | |||||||||
| H | Hart; | ||||||||||
| A | Switch and number; | ||||||||||
| L | transmitter with LCD | ||||||||||
| NA | No signal output | ||||||||||
| Indicator type | O | Aluminium indicator holder | |||||||||
| S | Sealed bargraph with stainless steel holder | ||||||||||
| L | Red/Green flaps with LED lamp | ||||||||||
| Structure | S | Steam tracing | |||||||||
| E | Electric heating | ||||||||||
| F | Defrost | ||||||||||
| NA | Ordinary type | ||||||||||
| Valve | D | Drain valve or drain plug | |||||||||
| DV | Drain valve and Vent valve or plug | ||||||||||
| N | No valve | ||||||||||
| Working temperature | A | Ambient temperature (0~60ºC) | |||||||||
| B | -20~90 C | ||||||||||
| M | -20~150ºC | ||||||||||
| H | High temperature (<450ºC) | ||||||||||
| L | If easy frozen | ||||||||||
| Material | SS304 | 0Cr18Ni9 | |||||||||
| SS316L | 022Cr17Ni12Mo2 | ||||||||||
| SS321 | 0Cr18Ni10Ti | ||||||||||
| PP | PP (Polypropylene),PVC,PVDF | ||||||||||
| PTFE | stainless steel lined with PTFE | ||||||||||
| FRP | Anticorrosive, <80C | ||||||||||
| Explosion-proof | S | Safety environment | |||||||||
| E | Explostion-proof ExdII BT4 | ||||||||||
| I | intrinsic safety ExibII CT4 | ||||||||||
| Measure range | Unit: mm | ||||||||||
| Fluid density | g/cm3 | ||||||||||
| working pressure | 2.5, 4.0, 6.4, 10MPa | ||||||||||
| Flange size, rate and standard | ANSI | DIN | JIS | ||||||||
| Example: UHC-C-YA-O-D-M-SS304-S-500-0.8-1-DIN DN25 PN16 | |||||||||||
| Model | TBS-F | TBS-A | UI-CV-F-HF | UI-CV-F-HT | RFL-40C |
| Type | Reflex | Transparent | High pressure reflex | High pressure Transparent | 90 degree Quick open/close |
| C-C (mm) | 300-3600 | 285-2590 | |||
| Visible Length (mm) | 95-3360 | 141-2433 | |||
| Gauge Material | CS,SS304,SS316L,Ti,etc | Cast steel | |||
| Glass Size | A1-A9, B1-B9 | A1-A9 | |||
| Glass Material | Borosilicate; Alumina-silicate | ||||
| Gasket Type | Graphite composite gasket; non-Asbestos gasket; Mica seal components | ||||
| suitable temperature | ≤450ºC | ||||
| Working pressure (Bar) | 40 (Groove glass) 100 (Plate glass) | 100 (Plate glass) | 40 (Groove glass) 160 (Plate glass) | 160 (Plate glass) | 40 (Groove glass) |
Typical pictures of magnetic level indicators
Model Selection Table of float magnetic level gauge
Basic selection of magnetic level indicator please refer to the following steps:
