- Capacities: 0-1kg up to 0-50kg
- Output: 2mV/V nominal
- Accuracy: <±0.03%/RC
- Only 35mm High
- IP51 Environment Protection
- Custom Versions Available
- Miniature and Compact - Easily fits in your application.
- Guaranteed High Performance - Dual bending beam design.
- Optional IP67 Gel-Filling - Ideal for wave tank monitoring.
- Fast and Simple Installation - With standard or customised mounting bases and fixtures.
- Improved Accuracy -With our specially designed rod end bearings.
- Submersible Versions Available - For marine and underwater applications.
- Customisation Available to Suit Your Specific Application
DESCRIPTION
Applied Measurements DBBSMM miniature S-Beam load cell (or Z-Beam load cell) is suitable for use in tension and compression and lends itself to both force and load measurement applications where the space to mount a standard size load cell is not available.
All of our miniature S-Beam load cells offer high accuracy of better than ±0.03% of their rated capacity and can be optionally gel-filled to provide a waterproof device suitable for applications such as wave tank monitoring.
Rod end bearings and load buttons are available (see gallery images) to provide optimum loading conditions.
If you require a miniature S-Beam load cell with a capacity greater than 50kg, Applied Measurements can manufacture special versions of the DBBSMM with measuring ranges of 100kg, 150kg, 200kg and upwards on request. Please contact your Applied Measurements expert sales team using the form in the sidebar to discuss your miniature s-beam load cell requirement in detail.
If you are not space-restricted, our DBBSM series of load cells covers load ranges up to 0-30,000kg (300kN).
Our s-beam load cells can be supplied with our Load Cell Instrumentation.
Type Technical Parameters Nominal Load Range 5~50t Analog Output 1.0±0.015mV/V Input Resistance 780±5Ω(ohms) Output Resistance 700±Ω(ohms) Operating Voltage 10~12VDC Effect of Temperature 0.05%FS/10ºC Operating Temperature -40~+85ºC Safe Load Limit 200%FS Safety Margin against Breakage 500%FS Material High performance alloy steel Protection Type IP 67 Zero Balance 1.0±% of rated output
Customized :
| CAP.SIZE (t/mm) | A | B | C | M |
| 0.005~0.05 | 64 | 51 | 12.7 | M12 |
| 0.1~0.7 | 76 | 51 | 19.1 | |
| 1~5 | 76 | 51 | 25.4 | M12 |
| 2~5 | 108 | 76 | 25.4 | M18×1.5 |
| 7.5~10 | 178 | 127 | 51 | M30×2 |
| 20 | 188 | 140 | 60 | M39×2 |
| Ib/inches(conversion of above dimensions ) | ||||
| 11.02~44.09 | 25.20 | 20.08 | 5.00 | |
| 220.46~1543.24 | 29.92 | 20.08 | 7.52 | M12 |
| 2204.62~11023.11 | 29.92 | 20.08 | 10.00 | M12 |
| 4409.25~11023.11 | 42.52 | 29.92 | 10.00 | M18×1.5 |
| 16534.67~22046.23 | 70.08 | 50.00 | 20.08 | M30×2 |
| 44092.45 | 74.02 | 55.12 | 23.62 | M39×2 |
Circuit Diagram:
Red: +input
Blue: -input
White: -output
Yellow: +output
| Item\Parameter | C3 | Unit | |
| Rated load(Emax): | 0.05~20 | t | |
| Maximal numbers of load cell cerification. Intrevals (NlC): | 3000 | d | |
| Maximal numbers of load cell cerification. Intrevals (NIC): | 0.01 | % of ratedload | |
| Rated output(Cn): | 2.0±0.1% | mV/V | |
| *Combined error : | 0.05 | ±% of rated output | |
| Temperature effect on sensitivity (Tkc): | 0.02 | ±% of rated output/ºC | |
| Temperature effect on zero balance (Tk0): | 0.02 | ±% of rated output/ºC | |
| Zero balance : | 1.0 | ±% of rated output | |
| Input resistance(Rlc): | 380±5 | Ω(ohms) | |
| Output resistance(Ro): | 350±2 | Ω(ohms) | |
| Insulation resistance : | ≥5000 | MΩ(Mege-Ohms) | |
| Safe overload : | 150 | ±% of rated capability | |
| Ultimate overload : | 200 | ±% of rated capability | |
| Operating temperature range : | -30~+70 | ºC | |
| Recommend excitation | 5~12 | V(DC or AC) | |
| Maximum excitation : | 15 | V(DC or AC) | |
| Material of elastomer : | Alloy steel /Stainless steel | ||
| Protection class | IP67/IP68 | ||
