China Low Price TC822V Vertical Truck Repair Machine Garage Wheel Tyre Changer with CE
| Model | TC 822V Vertical Truck Tire Changer /Tire Changing Machine/ Tire Fitting Machine |
| Tubeless Tire Range | 650r16-1200-22.5 |
| Tube Tire Range | 650 16-1300-20 |
| Rim Center Bore Size | 110-300mm |
| Max. Torque | 7565N.M |
| Hydraulic Power Unit | 3KW |
| Voltage | 220V/240V/380V/415V 50Hz/60Hz |
| Weight | N.W:560kg ; G.W:607kg |
| Certificate | 14 months |
1. The chuck can be turned over,and the jaws clamp the rim firmly, without hurting the rim, and the operation is more assured. The internal gear of the chuck is durable and long service life.
2. Seamlessly welded slider,with adjustable gaps at twelve places around,reserved for later tooling.
3. The pressure wheel can rotate in parallel,and it is smart and convenient to operate without damaging the tire. There are two ways to install the tire with the pressure wheel and the pressing head.It is scientifically selected according to the age of the tire,so as to truly achieve safety and efficiency without damaging the bead.
4. The slide way system adopts the technologically advanced hydraulic system engineering oil circuit to meet your frequent use needs. The powerful hydraulic motor makes it easier to disassemble and install tires.
1. Why is filter-regulator (FRL) so important?
It dry the air so there is no moisture inside pneumatic components. It lubricates the rubber seals to extend its service life. In general FRL is important to maintain long service life of the machine.
2. When working table doesn't turn, how to determine if the problem comes from gearbox, motor or switch?
Disconnect belt and see if the motor can run properly. If not, test the motor itself to see clockwise rotation and anti-clockwise rotation. If motor running properly then the problem is the switch.
We have trouble shooting in details, please contact us for more information.
3. When working table doesn't have needed power to clamp the rim, how to trouble shooting if the problem comes from table cylinder, turning air distributor or pedal valve?
When the cylinder not strong enough, there could be air leaking. The leaking could be on the covers or internal piston. There is a systematic method to trouble shoot, please contact us if you are interested in how to trouble shoot.
You can press " CONTACT NOW " or " CHAT WITH SUPPLIER " to get more details.
Also by other contact ways .
