Ventilation of the sanding booth
LONGXIANG sanding booth has several ventilation systems which provide better painting conditions. All the filter systems and air exhaust systems underneath create a efficiently vertical air flow; and this air flow distribute inside of the booth evenly; then this air flow make overspray removing away from the vehicle immediately and completely.
Air recirculation on baking model
100% of the air produced by the fan is transported into LONGXIANG sanding booth during the baking model; and only 15%-20% is expelled outside which means the balance 85%-80% is recovered and filled up with fresh air by means of the changeover damper.
The inner temperature of the LONGXIANG sanding booth raises rapidly; Then the heating system will power off at once when it reaches at baking temperature, this will save more energy.
Lighting
The lighting system is provided by four*16W light fixed in the ceiling panels and side walls. They are sealed with 5mm tempered safety glass. LONGXIANG spray booth lighting system is able to supply enough lighting with lower energy consume safely.
Filters
The filtering system is made up by high-efficiency filters. The filers hold higher dust retention capacity and lower resistance to the air passage. The long life designing reduces frequency of replacement, which is contributing to reductions in running costs.
Warranty
Our equipments except quick-wear-parts are guaranteed for 12 months from the date of receipt, and the filters and lamps are quick-wear-parts.
| LX-6-2-1 | |
| Outside Size | 7550×3550×3400mm (L×W×H); |
| Inside size | 6300×3450×2700mm (L×W×H); |
| Basement | The floor is assembled by galvanized steel plate laser cutting molding and galvanized square tube. It is 280mm high. There are five rows grills,The installation specifications are standardized and durable. Use a fixed -ruler steel plate grille 30 × 4 flat steel to ensure load -bearing and galvanized rust treatment. |
| Ramps | Two ramps, 620*2000mm (W*L) full sealing pattern board, powder coating and rust -proof treatment. |
| Static room size | 6400×3550×380mm (L×W×H); |
| Lighting | Eight groups of upper lights × 4 = 32 16W light tube; galvanized plate powder coating light box housing, 3C quality certification tempered glass high -transmitting panel. |
| Cabinet | They are made of spraying profiles and steel plates with external protective films, which improves the ability to resist corrosion and rust resistance, and extend the service life. |
| Air supply system | The size of the cabinet is 1700 × 900 × 3100 mm (L × W × H), and the oversized fans can fully meet the needs of the polishing room exhaust; a 5.5kW YDW inner rotor fan, air volume: 20000m³/h |
| Exhaust air system | The size of the cabinet is 1300 × 900 × 1500 mm (L × W × H), and the oversized fans can fully meet the needs of the polishing room exhaust; with a 5.5kW YDW series fan, air volume: 15000m³/h, small volume, large air volume, low noise, and small vibration; heat -resistant moisture and durability. |
| Heating system | With 1 Riello G10 burner. With stainless steel heat exchangers. heat capacity100000kcal/h. |
| Glass | The light glass is tempered glass. |
| Filtering system | Primary filter bag, high -level filtration, ground cotton filter is glass shredded; G2 level, filtering effect is 83%, which is the production of Italian technology, effectively capture dust particles greater than 10um, EU5 level efficient filtering, which can be produced in Dutch technology, which can efficiently capture greater than 4um more than 4um The capture rate of dust is as high as ≥99%. The embedded filter cotton bracket is convenient for replacing filter cotton, multi -layer glass fiber cotton, and the filtering effect is> 70%. |
| Roof | 0.6mm galvanized steel roof panels. |
| Control system | Air fan ,lighting. |
| Sealing type | 3 sides PVC curtain and 1 side wall panels |
| Installation way | Steel rope hanging or steel pole supporting the roof(Option). |
| Frequency | 380V,50HZ,3ph. |
| Total power | 12.2W |
