CL-500PGC1
220V/110V
12 Months
Colo
35kgs
Gema Replacement
69X56X52 Cm
50W
Electrostatic Spraying Equipment
Hardware Spraying Equipment
Powder
CE, ISO, REACH
Manual
New
Online
COLO
Carton
69*53*57cm
Hangzhou. China
842489990
Product Description
CL-500PGC1 Powder Gun Coating System
Powder Coating Control Unit # PGC1 with a PG1 Gun and cable
PGC1 POWDER COATING GUN CONTROL FOR GUNS PG1, PG 1-A, & PG 2-A
Electrical data
Technical data for the PGC 1 Powder Gun Control
Single-phase AC
Selectable voltage: 100 V, 110 V, 120 V, 200 V, 230 V or 240 V
Tolerance (at 230 V): ± 10%, based on 230 V (198 V-253 V)
Voltage selection is made on the inside of the electrical unit by resoldering the tag of the transformer.
The value of the fuse for 100, 110, and 120 V is 1, 0 AT and for the higher voltages is 0, 5 AT.
The equipment is delivered for operation at 230V from the factory.
Frequency: 50/60 Hz
Connected load: 50 VA
Rated output voltage (to gun): 10 V
Rated output current (to gun): 1.2 VA
Type of protection: IP 54
Temperature range: +10o C to +40o C (+50o F to +104o F)
Specification of the external control signal:
Nominal voltage: 24 VDC
High-Voltage - On: 0...2, 5 V
High Voltage - Off: 16...30 V (max. 35 V for t <100 ms)
Input current: 12 mA (typically at 24 V)
Pics
Powder Coating Control Unit # PGC1 with a PG1 Gun and cable
PGC1 POWDER COATING GUN CONTROL FOR GUNS PG1, PG 1-A, & PG 2-A
| Power range | 220v |
| Frequency | 50/60HZ |
| Temperature range in use | -10 +50 |
| Gun weight: | 500g |
| Rated output voltage | 24VDC |
| Input voltage | - 200kv |
| Maximum output current | 180Ua(max) |
| Maximum output voltage | 0-100KV ( adjustable) |
| Maximum powder injection | 600g/min |
| Polarity | negative (-) |
| Maximum input-air pressure | 8kg/cm |
| Optimum input-air pressure | 6kg/cm |
Electrical data
Technical data for the PGC 1 Powder Gun Control
Single-phase AC
Selectable voltage: 100 V, 110 V, 120 V, 200 V, 230 V or 240 V
Tolerance (at 230 V): ± 10%, based on 230 V (198 V-253 V)
Voltage selection is made on the inside of the electrical unit by resoldering the tag of the transformer.
The value of the fuse for 100, 110, and 120 V is 1, 0 AT and for the higher voltages is 0, 5 AT.
The equipment is delivered for operation at 230V from the factory.
Frequency: 50/60 Hz
Connected load: 50 VA
Rated output voltage (to gun): 10 V
Rated output current (to gun): 1.2 VA
Type of protection: IP 54
Temperature range: +10o C to +40o C (+50o F to +104o F)
Specification of the external control signal:
Nominal voltage: 24 VDC
High-Voltage - On: 0...2, 5 V
High Voltage - Off: 16...30 V (max. 35 V for t <100 ms)
Input current: 12 mA (typically at 24 V)
Pics
