Colo-668 Manual Powder Coating System
providing powder coaters with the same four pre-programmed modes as the COLO-668
Series - Coating Mode, Re-coat mode, Corner mode, and Pulse mode.
The Colo-06 manual powder gun is lightweight and well balanced to provide the highest
level of operator comfort for increased productivity.
A wide selection of spray nozzles,and extensions provides the ability to quickly adapt to
specific or unique applications.
| power range | 220v |
| Frequency | 50/60HZ |
| Temperature range in use | -10 +50 |
| Gun weight: | 500g |
| Rated output voltage | 24VDC |
| Rated output voltage | 24VDC |
| Input voltage | - 200kv |
| Maximum output current | 180Ua(max) |
| Maximum output voltage | 0-100KV ( adjustable) |
| Maximum powder injection | 600g/min |
| Polarity | negative (-) |
| Maximum input-air pressure | 8kg/cm |
| Optimum input-air pressure | 6kg/cm |
electric heating powder coating oven:Colo-1864
electric heating: convenience, low cost equipment, the use of high cost
suitable for small output workpiece.
1.Rock wool sandwich panel,120mm thick.Powder Coating Oven Outside is colorful steel,
powder curing oven inside is gavalnized steel, anti-flame and heat-insulation
2. furnaces for polymerization equipment compact structure, solid and durable, good sealing insulation
3. Automatic control them completely, without staff on duty
4.electric Powder Coating Oven electric heating: convenience, low cost equipment, the use of high cost.
5.Specifications and configuration of the above devices can be manufactured according to customer demand.
Model | Colo-1864 |
Worksize dimensions | 1650width x 1700 height x 3200 depth |
Overall dimensions | 1950 width x 2100 height x 3600 depth |
Power supply | Electric/ 30kw |
Voltage/Frequency | 380V/220v(50-60hz) |
Warm-up time | 15-30 min. (180° C) |
Temperature stability | < ± 3-5°C |
Temperature max. | 250° C |
Ventilation performance | 1131-2565m3/h |
Motor power | 1.5kw |
Circulation/ Air flow | Vertical ,Variable through holes on the walls |
COLO-S-1517 Spray Booth with Single-stage Filter Recover
this new powder coating booth with PLC controller,coul control the powder coating.
booth more accurate.we could provide you the powder coating booth that will fit your needs.
the powder coating spray booth fans draw air through filters . as the cartridge filters load,air flow
decreases and the negative pressure rises within the air handler. a timer activates a system of
air purging valves that clear the cartridge filters of the accumulated powder to ensure max filter life.
Durable, long-life powder-coated steel structure with high-quality galvanized canopy and floor
Low-profile booth base eliminates operator platforms
Requires only quick, easy conncet electrical and pneumatics to start production
specification
| Model | COLO-S-1517 |
| Booth Type | Closed |
| Operator dimensions | W1500*D1000*H1700mm |
| Overall dimensions | W1640*D2070*H2180mm |
| Weight | 150kg |
| Power supply | Electric |
| Nominal power | 2.2kw |
| Voltage | 380V |
| Frequency | 50-60Hz |
| Filters | Polyester |
| Filters count | 2 (325*900) |
| Filters hang type | easy for change |
| Filter cleaning system | Pneumatic |
| Air consumption | 4000m3/h |
| Warranty | 12 months |
We are specialized in complete electrostatic powder coating line, curing and drying ovens, recovery
systems, spray booth, conveyor systems, pretreatment plants. Also supply powder coating,
powder filters, equipment for powder coating, painting guns, pumps and their equipments.
Our Service
1. Before-Sale Service
Before your purchase, our engineers, who has more than 10 years in the field of powder coating,
Will have a complete communication with you, to get a full understanding of your coating requirem
-ents. We'll make a detailed quotation and layout plan based on your actual production conditions.
We not sell powder coating line, we are doing Your surface treatment equipments.
2. After-Sale Service
Our after-sales service team provides comprehensive support and assistance for colo's customers worldwide, not only during the installation and test tuning period of our powder coating line, but also during its entire service life. Highly qualified technicians are available to make service visits to custo
-mers and to carry out maintenance
3. Spare Parts
Spare parts are available, and can be purchased, for all equipment supplied by COLO. A team of experienced engineers will give advice and provide assistance in handling spare parts requirements. Please always state the reference number of the relevant equipment when making an inquiry
4. Training Of Customers
Colo offers comprehensive training to ensure optimum operation and maintenance of our powder
Coating line.
any question,pls contact us !!!
