winding machine
Lithium-Ion Batteries
Electric Bicycle, Cellphone
8V
High Discharge Rate
Square Battery
Alkaline
Fixed
Chargeable
220V/110V 50Hz/60Hz
60W
0.2-0.4MPa
Cylinder, Prismatic, Pouch Cell
Lithium Ion Battery Materials
Lithium Ion Battery Machine
Thermal Battery Materials
Battery Winding Machine
Gelon
Wooden Carton
GN-JR05
China
Product Description
Manual Winding Machine for Electrodes and Separator Winding Process for Cylinder Cell and Pouch Cell Battery Machine
The equipment is used to wind the small prismatic battery blocks, also used to wind the inner cores of electronic components.
The main axle of equipment turns electrically, the winding speed varies with the variation of frequency, it draws the needle and unload matenids pneumatically and is easy to operate. The winded products are of uniform tightness, tidy; and the winded blocks lose little powder.
2) Technical parameters
1) Power supply: 220V, 50HZ
2) Power consumption: About 60W
3) Air consumption: 0.05m3/min
4) Pressure: 0.2~0.4 Mpa
5) Rotation speed of main axle: 0~100rpm, it can be adjustable and varies with the variation of frequency.
6) Winding diameter:ф50
7) Max winding width: 60mm
8) Outer dimension: 900×550×1300mm
Cylinder Cell Mould:
Pouch Cell Mould :
TKS FOR YOUR TIME,WELCOME TO INQUIRY.
Specification:
1) OutlineThe equipment is used to wind the small prismatic battery blocks, also used to wind the inner cores of electronic components.
The main axle of equipment turns electrically, the winding speed varies with the variation of frequency, it draws the needle and unload matenids pneumatically and is easy to operate. The winded products are of uniform tightness, tidy; and the winded blocks lose little powder.
2) Technical parameters
1) Power supply: 220V, 50HZ
2) Power consumption: About 60W
3) Air consumption: 0.05m3/min
4) Pressure: 0.2~0.4 Mpa
5) Rotation speed of main axle: 0~100rpm, it can be adjustable and varies with the variation of frequency.
6) Winding diameter:ф50
7) Max winding width: 60mm
8) Outer dimension: 900×550×1300mm
Cylinder Cell Mould:
Pouch Cell Mould :We could supply one stop solution ( turn key project) for lithium ion battery production line.
1.Full set of lithium battery materials,including :
LiMn2O4,LTO,LiNiMnCoO2(NMC),LiCoO2,Graphite(MCMB)and other cathode&anode battery materials;Aluminum foil,copper foils,battery separator,etc.
2.Full set of lithium battery equipments,for example:
mixing machine --coating machine--oven--rolling machine--welding machine--slitting / cutiing machine --winding machine--sealed machine,etc.
3.Full set of lithium battery technology.
we can design the laboratory and production line,according to customer's request.
TKS FOR YOUR TIME,WELCOME TO INQUIRY.
