| Model | 4LZ-1.6 Combine Harvester | |
| Dimension | (L*W*H (with canopy) 4350*2100*2550 mm | |
| Weight | 2100 KGS | |
| Engine | Model: 4B2-45V32 | |
| Type: Water-cooled In-line 4 Stroke | ||
| Displacement:(L)2.417 | ||
| Output (kW/HP/rpm): 33.5/ 45.5 /2600 | ||
| Fuel Tank Capacity(L ): 48L | ||
| Drive System | Crawlers | Track Gauge Rubber lug wheel with thick rim |
| Width * Ground Contact Length: 380* 1440mm | ||
| Average Ground Contact Pressure (kPa): 0.27 | ||
| Minimum Ground Clearance: 230mm | ||
| Transmission Type | HST (Hydro Static Transmission) | |
| Traveling Speed (km/h) 6.36 | ||
| Steering | Clutch and Brake | |
| Cutting | Pickup Reel Diameter x Width: 600*1200 mm | |
| Height Adjustment: Hydraulics | ||
| Gathering length (mm/inch): 1245/49.1 | ||
| Cutter Bar length(mm/inch): 1450/56 86 | ||
| Cutting Height Range(mm/inch): -0(0)-800(31.5) | ||
| Threshing System Spiked Tooth Axial Flow | ||
| Threshing/Separating | Threshing system spiked tooth axial flow | |
| Threshing Cylinder | Diameter x Length (mm/inch): 450/17.8x1320/51.76 | |
| Revolutions (rpm): 625 | ||
| Concave Area (m2): 0.7185 | ||
| Cleaning | Oscillating 3 Way Air Stream Cleaning System | |
| Electrical Start System | Battery Starting, Lighting equipment, Alarms Electrical System Coolant Temperature, Battery Charge, Engine Oil, Grain Tank Full,Clogging | |
| Performance | 0.1-0.16(hectare per hour) | |
- It is mainly used for harvesting rice, also suitable for harvesting wheat, with comprehensive economic benefits.
- Lengthen Threshing Cylinder, Double Threshing Sieves, and the Secondary Thresher are equipped, which make grain cleaner.
- Strengthen Chassis with min. Ground clearance 275mm, technology of roller seal type are adopted from half feed combine harvester.
- It adopts Axial Flow Threshing Cylinder, rotating speed and threshing clearance can be adjusted, and thus suit for different crops.
- New outline, plastic steel awning, and baking finish are to taste of our customers.
- Mechanical steering system, hydraulic steering system and HST are optional.
Q1: Are you a factory or trading company? We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company? We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there? Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website? It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment? Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice. 30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms? T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good? We usually ship goods via Qingdao port of China.
Q8: How about the Warranty ? 12 months warranty from the time of the goods arrive at destination.
QC Flow:
1. Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. Our manufacturing facility is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments.
Spare Parts:
We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure, please Contact Us .
Shipment:
We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days
PRE-SALE SERVICE
We have 8-24 hours online staff to answer your technology questions and know your requirements. our staff can provide you the professional designs and recommend you the most suitable machine types.
SALES SERVICE
Provide users with comprehensive technical support,with the user selection,to provide the most economical and reasonable program. In accordance with the contract delivery time for your timely delivery,if have special requirement,our company can organize pro duction,and strive to meet user needs.
AFTER-SALES SERVICE
We have 24 hours online staff to answer your technology questions and know your requirement. Our staff can provide you the professional design andrecommend you the most suitable machine type.
SALES GOAL
We hope our outstanding quality goods and good service could make you to set up the best competitive advantages in your marker
