Mini Portable Drilling Rig Machine XR150D.
1,It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability;
2,It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost;
3,Cummins electric control turbo-supercharged engine is used. It complies with Euro III emission standard ,In addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard;
4,Using full electronic control technology of CAN bus, Improves the reliability of the whole vehicle and simplify hydraulic line, Fully reflects the people, machine, electricity and liquid integration;
5,Winch-crowd and sleeve-driven functions are available for selection to CFA, hydraulic casing oscillator, DTH hammer satisfy various needs of the users;
6,It is equipped with a centralized lubrication system as standard configuration; maintenance is easier;
7,The machine obtains CE certfication of TüV Rheinland group.
8,The main parts are imported from international manufactures : Rexroth A8V0 constant power series with double pumps,motor,pilot proportional control valve ,reducer,imported controller,which guarantees its reliability.
I Host machine: 1800mm of drilling diameter, 60m of drilling depth, 180kN.m of Max.troque. Imported Cummins (194kW) turbo charging engine, imported hydraulic and electrical components, telescopic tracks chassis, and single layer main winch.Meet the requirements of the European Union CE directive.
II Drill rod: choose one drill rod from standard configuration (φ406) 5-section frictional drill rod (60m) or 4-section mechanical interlock drilling rod (46m).
III Bit: one standard configuration bucket teeth sand drill rigs (each one for φ600mm~ φ1800mm).
| Main Technical Specification | |||
| Engine | Model | CUMMINS B5.9-C | |
| Rated Power | kW | 133 | |
| Rotary Drive | Max. output torque | kN·m | 150 |
| Rotary speed | r/min | 6~28 | |
| Max. Drilling Diameter | mm | 1300-1500 | |
| Max. Drilling Depth | m | 48-55 | |
| Pull-Down Cylinder | Max.pull-down piston push | kN | 120 |
| Max.pull-down piston pull | kN | 160 | |
| Max.pull-down piston stroke | m | 3.5 | |
| Main Winch | Max.Pulling force | kN | 145 |
| Max.line speed | m/min | 75 | |
| Auxiliary Winch | Max.Pulling force | kN | 50 |
| Max.line speed | m/min | 60 | |
| Mast Rake | Side/forwards/backwards | ±3°/5°/15° | |
| Undercarrige | Max. traveling speed | km/h | 3.2 |
| Max.grade ability | % | 40 | |
| Min. Clearance | mm | 352 | |
| Track shoe width | mm | 800 | |
| Distance between tracks | mm | 3200~4200 | |
| Hydraulic System | Working pressure | MPa | 32 |
| Overall Drilling Weight | t | 47 | |
| Dimension | Working condition | mm | 7122X4200X17250 |
| Transportation condition | mm | 12300X3200X30 | |
2. Working on Earth and stone construction projects
(1) Municipal construction,
(2) highway bridges,
(3) housing construction,
(4) road engineering,
(5) farmland water conservancy construction,
(6) port construction
..............
3. Features advantage:
(1) Power drive flexible suspension damping;
(2) Dual-pump combined technology, flow expanding steering, guide control;
(3) The frame of the high strength adapts to the heavy load condition;
(4) Working mechanism lightens the unloading impact greatly;
(5) Hydraulic wet brake ensures the safe and reliable operation and travelling;
(6) The adjustable instrument panel contributes to the best operation position;
(7) Intelligent electronic monitoring system could monitor the operation condition of the machine accurately.
(8) Convenient maintenance
With integrated oil filling, the service person could access to the maintenance point from the ground, featuring higher efficiency.
The side plates of the shield and rear shield are opened easily, and it is convenient to check the engine and parts, and daily maintenance.
1. Features advantage:
(1) The Z-shaped link mechanism designed espeially for stone operating cnditions features high breakout force and loading capacity and the classic double-rocker structure ensures a broad operating view.
(2) The higher dumping height and dumping distance, extensive rotation angle scope of forks, and adjustable fork spacing are suitable to diversified operation needs, induding the forklifting and overturning of stones.
2. Characteristic:
(1) Power drive flexible suspension damping;
(2) Dual-pump combined technology, flow expanding steering, guide control;
(3) The frame of the high strength adapts to the heavy load condition;
(4) Working mechanism lightens the unloading impact greatly;
(5) Hydraulic wet brake ensures the safe and reliable operation and travelling;
(6) The adjustable instrument panel contributes to the best operation position;
(7) Intelligent electronic monitoring system could monitor the operation condition of the machine accurately.
(8) Convenient maintenance
With integrated oil filling, the service person could access to the maintenance point from the ground, featuring higher efficiency.
The side plates of the shield and rear shield are opened easily, and it is convenient to check the engine and parts, and daily maintenance.
3. Working on various Earth construction projects
1. Quality assurance
2. Multi-currency payment ( RMB / USD / EUR) & Multi Payment team: T/T, L/C at sight....
3. Cheap shipment costs, Rich container package & Fast shipment:
Raygoo group cooperated with many shipping company many years, which can get the cheapest ocean freight with latest shipping date, even whole shipping tracking.
4. Long-term spare parts support:
Since 2015, in order to effectively solve our customers spare parts demand, we built a spare parts department, which get high speaking feedback from our clients.
5. Long-term technical service support:
We have a professional technical team which provide technical support for our domestic or oversea clients. If clients have some technical problems which can't deal with it by self, we can provide video support or door to door support.
6. Door and door service:
Till now, we can support door and door assembling service if they can't assemble it when container arrived in some countries,such as Philippines, Zimbabwe, Mozambique, Kenya, Cambodia, Indonesia.... If the quantity is large, even can provide engineer indoor support.
7. Rich brands:
As we worked on construction machines more than 15 years, which already build nice strategic relationship with world brand company for competitive price and quality.support
