490QC-2409000600101Z
Iron
Polishing
Non-Customized
Standard
Forklift Engine Camshaft
490QC-2409000600101z
Quanchai QC490 Diesel Engine
Quanchai Engine Genuine Parts
Leading Forklift Parts
Inside PVC Bag, Outside Carton
59*9*9 cm
China
8409999990
Product Description
Product Title: Forklift Engine Camshaft
Product Model: 490QC-2409000600101Z
Forklift Engine Camshaft
A forklift engine camshaft is a cylindrical rod body approximately the same length as the cylinder block. There are several cams on it, which are used to drive the valves. The camshaft is supported by the camshaft journal in the camshaft bearing hole, so the number of camshaft journals is an important factor that affects the rigidity of the camshaft support. If the rigidity of the camshaft is insufficient, bending deformation will occur during operation, affecting the timing of gas distribution.
The sides of the cam are egg-shaped. The purpose of its design is to ensure sufficient intake and exhaust of the cylinder. In addition, considering the durability of the engine and the smoothness of the operation, the valve should not generate too much impact due to the acceleration and deceleration in the opening and closing action, otherwise, it will cause serious wear of the valve, increased noise or other serious consequences.
Product Model: 490QC-2409000600101Z
| Item | Description |
| Product Name | Forklift Engine Camshaft |
| P/N | 490QC-2409000600101Z |
| Applied Model | Quanchai QC490 Diesel Engine |
| Net Weight (kg) | 3.90 |
| Gross Weight (kg) | 4.50 |
| Qty per Carton | 1 |
| Carton Size (cm) | 59*9*9 |
Forklift Engine Camshaft
A forklift engine camshaft is a cylindrical rod body approximately the same length as the cylinder block. There are several cams on it, which are used to drive the valves. The camshaft is supported by the camshaft journal in the camshaft bearing hole, so the number of camshaft journals is an important factor that affects the rigidity of the camshaft support. If the rigidity of the camshaft is insufficient, bending deformation will occur during operation, affecting the timing of gas distribution.
The sides of the cam are egg-shaped. The purpose of its design is to ensure sufficient intake and exhaust of the cylinder. In addition, considering the durability of the engine and the smoothness of the operation, the valve should not generate too much impact due to the acceleration and deceleration in the opening and closing action, otherwise, it will cause serious wear of the valve, increased noise or other serious consequences.
