| Wavelength and Frequency | 161.975MHz, 162.025MHz |
| Style | Sky Wave |
| Operating Temperature | -20°c-55°c |
| Modulation Mode | Gmsk/FM |
| Specification | Radar SART |
| Model Number | Cy-Vh01 |
| Style | Sky Wave |
| 1. Power supply | |||
| Voltage range: | From 4.0V to 6.5V(Supply from battery) | ||
| 2. Signal | |||
| Frequency: | From 9200MHz to 9500MHz | ||
| Polarization: | Horizontal | ||
| 3. Antenna | |||
| Vertical beam width: | ±12.5 degrees | ||
| Horizontal: | 360 degrees(Omni directional) | ||
| 4. Reception: | Effective receiver sensitivity(ERS):Better than -50dBm | ||
| Recovery time: | 10 μs or less | ||
| 5. Transmission | |||
| Modulation method: | Q0N(Pulse Modulation) | ||
| Form of Sweep: | Saw Tooth | ||
| Forward of Sweep Time: | 7.5±1.0μs | ||
| Return Sweep Time: | 0.4±0.1μs | ||
| Response Signal: | 12 Sweeps | ||
| Power(EIRP): | Not less than 400mW(+26 dBm) | ||
| Delay: | 0.5μs or less | ||
| 6. Battery | |||
| Battery Type: | Lithium Non-Rechargeable Sealed Battery | ||
| Nominal Voltage: | 6V | ||
| Capacity: | Stand-by condition minimum 96 hours; | ||
| Transmission 8 hours | |||
| Validity period: | 3 years after replacing the battery | ||
| 7. Temperature range | |||
| Stowage: | -30ºC~+70ºC | ||
| Ambient: | -20ºC~+55ºC | ||
| 8. Physical characteristics(Main Unit) | |||
| Size: | 309×ø88mm | ||
| Weight: | Approx.600g | ||
600c SART signal, when received by the TBR-600c SART on the radar scope of the SAR craft. Thus, a TBR-600c SART helps to make SAR operation very efficient, especially, at night, in bad weather or in the poor visibility.
1.Our Shipyard:Ningbo Zhenhe shipyard, and now Taihang is the branch representative of our yard.
2.Our founding team has experience of more than 15 years in ship building and ship repair with our own engineer and designer.
3.Equipment quality guarantee: Based on shipyard feedback, we built up manufacturer file to ensure the good quality of the products. Also we can send our engineers to help our clients to install and test these exported equipment.
4.We are a second hand ship broker to help you find the satisfied used different kind vessels.
5.We are able to provide the CKD kits and one-stop service based on our laser-cutting machine and purchase ability
6. We have a very professional design and technical team to work out perfect plan for our clients and help to slove out any matters with pre-sale and after-sale.
7.Customer Distribution: Tananzia, Rwanda, India(Mumbai and Kalkatta), Suva, Portugal, Russia, Nertherland, Iceland, Denmark, Malaysia, Mexico.......
